Archivi tag: nailtech

Come mantenere bella una ricostruzione

Ciao a tutti!

Oggi nuovo articolo. Voglio darvi consigli e spiegarvi come mantenere durante le ipotetiche 3 settimane, o di più, le unghie ricostruite belle.

Iniziamo!

Usare le unghie con delicatezza

Probabilmente per chi non ha mai avuto la unghie lunghe e all’improvviso se le ritrova di 2 centimetri, all’inizio sarà difficile imparare a gestirle e conviverci.

Inizialmente si potrebbero prendere parecchie botte, ma quello non è un problema perché se una ricostruzione è eseguita bene, seguendo i corretti canoni, ci saranno maggiori probabilità che non si rompa.

Il problema è quando si usano le unghie ricostruite come se non ce le avessimo.

Non fraintendetemi, potete fare tutto però bisogna avere qualche accortezza in più

L’importante è usare le unghie con delicatezza e non come attrezzi.

Evitate di usarle come leve, e se avete dubbi su come vivere con le unghie lunghe, leggete questo articolo dove vi do qualche consiglio su come gestirle.

Prodotti chimici

Noi donne, giovani o più mature, prima o dopo avremo a che fare con i prodotti chimici, che possono essere quelli per pulire casa, per il bucato o non so, prodotti chimici usati per particolari lavori.

Se si sa che se ne fa spesso uso, per preservare la lucidità e l’integrità sarebbe meglio indossare dei guanti.

I prodotti aggressivi potrebbero compromettere la ricostruzione, causando opacità del top coat o magari sollevamenti.

Mani in bocca

Questo vale sia per per le persone onicofagiche che di abitudine hanno le mani in bocca, ma anche per le persone che non hanno questa abitudine.

Magari si è nervosi o sovrappensiero e si portano le unghie alla bocca.

Sempre al fine di mantenere una ricostruzione perfetta durante il tempo, sconsoglio di giocherellare e mordicchiare le vostre unghie.

Comunque i prodotti come gel e acrilico sono duri e potreste causarvi danni ai denti o comunque ingerire piccole parti di prodotto e non è salutare.

Non strappare le unghie

Un’altra cosa fondamentale per mantenere le unghie sane è quello di non strappare le unghie.

La tentazione potrebbe insorgere se come dicevo prima, abbiamo le mani in bocca, ma anche se ci sono dei piccoli sollevamenti.

Non strappate mai i sollevamenti o le unghie sollevate, sia per non eliminare importanti strati delle vostre unghie, ma anche per facilitare poi il lavoro dell’operatrice.

Se strappate una o più unghie, poi le toccherà ricostruirla, impiegando più tempo del previsto.

Rispettare i Refill

Per ultima metto penso la cosa più importante.

Per evitare sollevamenti e rotture di unghie, è importantissimo rispettare i tempi del refill.

Ogni circa 3-4 settimane è importante tornare dell’operatrice per ribilanciare la bombatura e quindi assicurarsi la salute delle proprie unghie.

Ovviamente potrebbero esserci persone tipo le onicofagiche che ogni 15 giorni devono presentarsi nel salone, perché è sempre meglio tenerle sotto controllo.

Se non si rispettano questi tempi, si rischia di presentare principalmente sollevamenti che potrebbero causare infiltrazioni di acqua, e comunque creare il territorio ideale per la crescita di batteri.

Inoltre più l’unghia cresce, più la bombura avanza e non protegge bene il punto do stress, questo si può tradurre in rotture di unghie, sia solo il prodotto ma anche la lamina, e vi assicuro che è molto doloroso.

L’articolo di oggi giunge al termine. Spero che con questi consigli riuscirete a tenere meglio le vostre ricostruzioni sia per preservare la salute delle vostre unghie ma anche per facilitare e fare felice la vostra onicotecnica.

Se questo articolo vi è piaciuto lasciate un like e condividete.

Non dimenticatevi di seguirmi su Instagram e sul mio canale YouTube

Alla prossima.

SOFIA

How to maintain a full set during time

Hello everyone!

Today new article. I want to give you advice and explain how to maintain beautiful reconstructed nails during the hypothetical 3 weeks, or more.

Let’s begin!

Use your nails gently

Probably for those who have never had long nails and suddenly if they find them 2 centimeters, at first it will be difficult to learn how to manage them and live with them.

Initially it could take a lot of hits, but that is not a problem because if a reconstruction is done well, following the correct canons, there will be a greater chance that it will not break.

The problem is when we use reconstructed nails as if we don’t have them.

Don’t get me wrong, you can do everything, however you need to have some more precautions

The important thing is to use the nails gently and not as tools.

Avoid using them as levers, and if you have doubts about how to live with long nails, read this article where I give you some advice on how to manage them.

Chemical products

We women, young or more mature, sooner or later we will have to deal with chemicals, which can be those for cleaning the house, for laundry or I don’t know, chemicals used for particular jobs.

If you known that you will use them often, it is better to wear gloves to maintain clarity and integrity.

Aggressive products could compromise the reconstruction, causing top coat opacity or maybe lifting.

Hands in your mouth

This applies both to onychophagic that are people who have their hands in their mouths constantly, but also to people who do not have this habit.

Maybe you are nervous or thoughtless and bring your nails to your mouth.

Always in order to maintain a perfect reconstruction over time, I recommend you not to fiddle and nibble your nails.

However products like gel and acrylic are hard and you could cause damage to your teeth or otherwise ingest small parts of the product and it is not healthy.

Don’t tear your nails

Another key thing to keep your nails healthy is not to tear your nails.

The temptation could arise if, as I said before, we have our hands in the mouth, but even if there are small lifts.

Never tear off the lifts or raised nails, in order not to eliminate important layers of your nails, but also to facilitate the work of the operator.

If you tear off one or more nails, then you will have to rebuild them, taking the process longer than expected.

Respect the Refills

Last of all, I think the most important thing.

To avoid lifting and breaking nails, it is very important to respect the refill times.

Every 3-4 weeks it is important to return to the operator to rebalance the apex and thus ensure the health of your nails.

Obviously there could be people like the onychophagics who must show up in the salon every 15 days, because it is always better to keep them under control.

If these times are not respected, there is a risk of presenting mainly lifts that could cause water infiltration, and in any case create the ideal territory for the growth of bacteria.

Furthermore, the more the nail grows, the more the apex advances and does not protect the stress point well, this can translate into broken nails, both only the product but also the surface, and I assure you that it is very painful.

Today’s article comes to an end. I hope that with these tips you will be able to better maintain your reconstructions both to preserve the health of your nails but also to facilitate and make your nail technician happy.

If you liked this article, leave a like and share.

Don’t forget to follow me on Instagram and on my YouTube channel

Until next time.

SOFIA

Testo la durata della polvere di velluto sulle unghie

Bentornati sul mio blog!

Oggi voglio parlarvi della durata che ha la polvere di velluto sulle unghie.

Iniziamo!

Cos’è

La polvere di velluto è caratterizzata da dei piccoli peletti, che quando sono applicati sull’unghia conferiscono ad essa una superficie morbida, tipo il velluto appunto.

Probabilmente avrete già visto che tra i brand di prodotti per le unghie, questa polvere è venduta come una novità, eppure esiste da parecchi anni.

Io la ho perchè quando andavo alle medie, e ne è passato di tempo, la Pupa vendeva dei kit di smalto e un prodotto da applicarci sopra.

Questo è proprio ciò di cui parlo.

Applicazione

Ne ho ancora parecchia di questa polvere perchè mi ricordo che non mi faceva impazzire applicata sullo smalto.

In pratica bisognava stendere prima una mano di colore e lasciarla asciugare.

Dopo, bisognava spargere sulla seconda mano di smalto ancora bagnata, questa polverina.

Ricordo che appena lavavo una o due volte le mani, l’effetto svaniva perchè lo smalto ha tempi di asciugatura molto lunghi.

Ho così pensato di fare un test e applicarla tipo i glitter effetto zucchero sul gel.

Dopo aver steso le due mani di colore, ho applicato un top coat senza dispersione e senza polimerizzare ho messo la polvere di velluto.

Poi sono andata in lampada.

Ho deciso di fare l’esperimento anche con lo smalto, in modo da confrontare bene i risultati.

Ho usato il mignolo e l’anulare, perchè sono le dita che usiamo di meno.

Durata

16 dicembre, ore 11:20

Queste sono le due unghie appena realizzate.

L’anulare è realizzato con lo smalto, il mignolo con il gel.

Entrambe sono molto belle, e danno bene l’effetto velluto.

16 dicembre, ore 13:30

Ho fatto passare due ore, per vedere soprattutto lo smalto come si comportava.

Ovviamente mi è capitato di lavare le mani, però nonostante avesse perso un po’ di polvere, il risultato non era male.

Il mignolo è rimasto invariato.

16 dicembre, ore 20

Dopo quasi 10 ore lo smalto iniziava già a darmi problemi.

Come potete vedere in questa foto, sul laterale sinistro e vicino alle cuticole, la polvere è quasi sparita del tutto.

Il mignolo come potete vedere rimane uguale.

17 dicembre

Queste sono le unghie il giorno dopo.

Il mignolo alla vista e al tatto rimane sempre molto morbido.

L’anulare invece ai lati ha perso completamente la polvere, ed è rimasto solamente lo smalto colorato.

Al centro invece anche lui è molto morbido ancora.

18 dicembre

Dopo due giorni, il mignolo ha perso un pochino la sua morbidezza, ma se lo tocchiamo possiamo comunque avvertire la polvere di velluto.

L’anulare peggiora ogni giorno di più.

La polvere di velluto sta diventando solo un ricordo.

Si è trasformata in chiazze e soprattutto non è più morbida, bensì sono diventati quasi grumi.

Lo potete capire dalla differenza che si vede tra il mignolo e l’anulare.

Dopo questi giorni, avevo capito più o meno l’andamento di questa polvere sulle unghie.

Sul gel, l’effetto avrebbe avuto più durata, ma comunque piano piano anche li i peletti sarebbero spariti.

Sullo smalto come avete potuto vedere anche dopo poche ore la polvere si levava, ed era giusto questione di uno o due giorni che il bell’effetto sparisse.

Ho lasciato passare dunque altri 10 giorni.

28 dicembre

Questo è il giorno in cui ho deciso di concludere l’esperimento.

Voglio fare prima di tutto una considerazione sullo smalto che ho usato come base.

Se vi ricordate avevo scritto un articolo in cui provavo varie marche di smalto.

Siccome avevo bisogno di durata, ho utilizzato la base che avevo ritenuto la migliore ai tempi: la Triple care di Essence. Devo dire che non mi ha delusa.

Questo è il risultato dopo 12 giorni.

Come potete vedere, su entrambe le unghie la polvere di velluto è sparita.

Giusto sul mignolo vicino alle cuticole sulla sinistra è rimasto qualcosina.

Entrambe le unghie presentano una superficie irregolare, ma questo perchè quando i prodotti erano ancora freschi ho applicato la polvere, che ha lasciato la sua “impronta”.

Considerazioni finali.

Cosa ne penso?

Lo smalto mi immaginavo avrebbe avuto questo comportamento, ma posso accettarlo.

Magari una persona vuole questo effetto e tiene in considerazione che gli dura solo due o tre giorni, poi cambia smalto.

Pensavo invece che sul gel sarebbe durato di più.

In genere una ricostruzione si tiene per 3 settimane, ovvero 21 giorni.

Questa polvere di velluto dopo 12 giorni era già sparita, lasciando un effetto poco bello.

Questa almeno una settimana dura bella, però dopo lascia l’unghia opaca e irregolare.

Il mio consiglio è dunque di usarla con lo smalto, tanto si può cambiare dopo due giorni, mentre sulla ricostruzione consiglio di usarla in altro modo.

Diverso utilizzo

I brand di prodotti per le unghie hanno fatto uscire dei nuovi colori semipermanenti effetto Cashmere, che sostanzialmente al loro interno hanno la polvere di velluto.

Ho realizzato a casa questa polvere, se volete vedere come ho fatto, guardate questo mio video sul mio canale youtube.

Questo articolo è finito, spero vi sia piaciuto questo test.

Se l’articolo vi è piaciuto lasciate like e condividete.

Non dimenticatevi di seguirmi su Instagram e sul mio canale Youtube.

Alla prossima

SOFIA

I challenge the lasting of the velvet powder on nails

Welcome back to my blog!

Today I want to talk to you about the duration that velvet powder has on your nails.

Let’s begin!

What’s this

Velvet powder is characterized by small hairs which, when applied to the nail, give it a soft surface, just like velvet.

You have probably already seen that among the brands of nail products, this powder is sold as a new product, yet it has existed for several years.

I have it because when I went to middle school, and it’s been a while, Pupa sold nail polish kits and a product to apply on it.

This is just what I’m talking about.

Application

I still have a lot of this powder because I remember that it didn’t drive me crazy applied on the polish.

In practice, it was necessary to first apply a coat of color and let it dry.

Afterwards, it was necessary to spread this powder on the second coat of still wet polish.

I remember that as soon as I washed my hands once or twice, the effect faded because the polish has very long drying times.

So I thought about doing a test and applying it like the sugar effect glitter on the gel.

After spreading the two coats of color, I applied a top coat without inibition layer and without curing I put the velvet powder.

Then I went to the lamp.

I also decided to do the experiment with the polish, in order to compare the results well.

I used the little finger and the ring finger, because it is the fingers we use the least.

Lasting

December 16, 11:20 am

These are the two newly made nails.

The ring finger is made with polish, the little finger with the gel.

Both are very beautiful, and give the velvet effect well.

December 16, 1.30 pm

Two hours have passed, especially to see the polish how it behaved.

Obviously I washed my hands, but despite losing some dust, the result was not bad.

The little finger has remained unchanged.

December 16, 8 pm

After almost 10 hours the polish was already starting to give me problems.

As you can see in this photo, on the left side and near the cuticles, the powder has almost completely disappeared.

The little finger as you can see remains the same.

December 17

These are the nails the next day.

The little finger at the sight and touch always remains very soft.

The ring finger on the sides has completely lost the dust, and only the colored polish remains.

In the center, on the other hand, it is still very soft.

December 18

After two days, the little finger has lost its softness a little, but if we touch it we can still feel the velvet powder.

The ring finger gets worse every day.

Velvet powder is only becoming a memory.

It has turned into patches and above all it is no longer soft, but has almost become lumps.

You can understand this from the difference that is seen between the little finger and the ring finger.

After these days, I had understood more or less the progress of this powder on the nails.

On the gel, the effect would have lasted longer, but in any case, even the hairs would have disappeared.

As you could see even after a few hours on the polish the powder disappeared, and it was a matter of one or two days that the beautiful effect disappeared.

So I let another 10 days go by.

December 28

This is the day I decided to end the experiment.

First of all, I want to make a consideration about the polish I used as a base.

If you remember I had written an article in which I tried various brands of nail polish.

Since I needed durability, I used the base that I had considered the best at the time: Essence’s Triple care. I have to say it didn’t disappoint me.

This is the result after 12 days.

As you can see, the velvet powder is gone on both nails.

Just on the little finger near the cuticles on the left side there is a little bit of powder .

Both nails have an uneven surface, but this is because when the products were still fresh I applied the powder, which left its “imprint”.

Final thoughts.

What do I think of it?

The nail polish I imagined would have had this behavior, but I can accept it.

Maybe a person wants this effect and takes into account that it lasts only two or three days, then changes the nail polish.

I thought instead that on the gel it would last longer.

Typically you keepa reconstruction for 3 weeks, 21 days.

On the 12 day this velvet powder was already gone, leaving an unattractive effect.

This at least one week lasts a good week, but afterwards it leaves the nail opaque and uneven.

My advice is therefore to use it with polish, you can change it after two days, while on reconstruction I recommend using it in another way.

Different use

The brands of nail products have released new gel polish Cashmere effect colors, which basically have velvet powder inside them.

I made this gel polish at home, if you want to see how I did it, watch this video of mine on my youtube channel.

This article is finished, I hope you enjoyed this test.

If you liked the article, leave it like and share.

Don’t forget to follow me on Instagram and on my Youtube channel.

Until next time

SOFIA

Come eseguire una preparazione impeccabile dell’unghia

Bentornati sul mio blog!

Oggi voglio spiegarvi come preparare nel miglior modo l’unghia naturale, cosicché il prodotto aderisca bene durante la durata di tutto il trattamento.

Iniziamo!

Lavare le mani

Un consiglio che vi do è quello di far lavare le mani alla cliente appena arrivata.

Come tutti noi, tocchiamo molte cose quindi sporco e batteri si depositano sull’unghia.

Facendole lavare le mani, puliamo maggiormente la loro superficie levando anche l’eventuale residuo grasso che è presente sulla lamina.

Dopo di che è sempre bene disinfettare le unghie con un prodotto adatto.

Rimozione cuticole

Parto col dire che i prodotti come gel e semipermanente, sono studiati appositamente per aderire sull’unghia, non sulla pelle.

Per questo è molto importante non toccare la pelle, ed eliminare le cuticole.

Inizialmente bisogna spingere con lo spingipelle, e se non si ha una fresa, con la parte “tagliente” bisogna far ben attenzione a rimuoverle tutte.

Se invece possediamo anche la fresa, potremmo fare una preparazione più accurata perché oltre a rimuoverle manualmente, con una punta diamantata potremmo rimuovere più in profondità le cuticole.

Opacizzazione

Dopo di ciò, con una lima 240 delicatamente opacizziamo la superficie dell’unghia. Con questo passaggio intanto rimuoveremo ancora eventuali residui di cuticole, e apriremo le lamelle dell’unghia, in modo che il prodotto possa aggrappare meglio.

In aggiunta se si ha una fresa, sempre con una punta diamantata potremmo raggiungere punti che con la lima non riusciamo.

È importante però non limare troppo l’unghia. Se si lima troppo, si assottiglia la lamina che, nei suoi strati inferiori è più umida.

Dunque si otterrebbe l’effetto contrario, ovvero sollevamenti.

Non toccare l’unghia

Durante tutti questi passaggi è importantissimo non toccare l’unghia, soprattutto con i polpastrelli.

Lo scopo della preparazione è quello di rimuovere le parti grasse dell’unghia, opacizzarla.

Se la tocchiamo vanificheremo tutti i passaggi precedenti.

Preparatori

Dopo aver preparato l’unghia, bisogna applicare i preparatori.

Non bisogna applicarne più del dovuto, sennò non aiuteranno l’adesione, anzi, la renderanno più difficile, causando possibili sollevamenti.

Siamo giunti alla fine di questo articolo, spero che vi sia piaciuto e che vi abbia fatto capire come preparare bene l’unghia.

Questi sono i passaggi fondamentali per assicurarci che il lavoro duri almeno le tre settimane.

Ovviamente conta anche la qualità dei prodotti che usiamo.

Se questo articolo vi è piaciuto, lasciate un like e condividetelo.

Non scordatevi di seguirmi su Instagram e su YouTube.

Alla prossima

SOFIA

How to prepare the natural nail

Welcome back to my blog!

 Today I want to explain how to prepare the natural nail in the best way, so that the product adheres well during the duration of the whole treatment.

 Let’s begin! 

Wash your hands

 A tip I give you is to have the customer wash their hands as soon as they arrive.

 Like all of us, we touch many things so dirt and bacteria settle on the nail. By making them wash their hands, we clean their surface even more, removing any grease residue that is present on the nail. 

After that it is always good to disinfect the nails with a suitable product.

 Cuticle removal

 I start by saying that products such as gel and gel polishes, are specifically designed to adhere to the nail, not the skin.

 For this reason it is very important not to touch the skin, and to eliminate the cuticles.

 Initially you have to push with the pusher, and if you don’t have an e-file, with the “cutting” part you have to be very careful to remove them all. 

If, on the other hand, you also have the drill, you could make a more accurate preparation because in addition to manually removing them, with a diamond bit we could remove the cuticles more deeply. 

Matt

 After that, with a 240 file we gently matt the surface of the nail. In the meantime, with this step, we will still remove any cuticle residue, and open the nail blades, so that the product can cling better.

 In addition, if you have an e-file, always with a diamond bit, you could reach points that you cannot achieve with the file

It is important, however, not to file the nail too much. If you file too much, the nail plate is thinned, which in its lower layers is more humid. 

Therefore the opposite effect would be obtained, that is lifting. 

Do not touch the nail 

During all these steps it is very important not to touch the nail, especially with the fingertips. 

The purpose of the preparation is to remove the fatty parts of the nail, to opacify it.

 If we touch it we will nullify all the previous steps.

Nail prep and primer

 After preparing the nail, primers must be applied. It is not necessary to apply more than necessary, otherwise they will not help adhesion, on the contrary they will make it more difficult, causing possible lifting.

 We have come to the end of this article, I hope you enjoyed it and made you understand how to prepare the nail well. 

If you liked this article, leave a like and share it. 

Don’t forget to follow me on Instagram and YouTube. 

Until next time

 SOFIA

Provo per la prima volta la Nail Art Wet on Wet

Bentornati sul mio blog!

Oggi voglio mostrarvi come ho realizzato per la prima volta delle unghie con la tecnica Wet on Wet.

Iniziamo!

Cos’è

La tecnica wet on wet, che in italiano si traduce con “bagnato su bagnato”, prevede l’utilizzo dei gel color, uno sopra l’altro, senza polimerizzare ad ogni passaggio.

Così facendo si creano delle bellissime sfumature tra i colori utilizzati.

Si può disegnare ciò che si vuole, ma io ho deciso di creare un fiore.

Base

In questo caso io eseguo il decoro su una tip, dunque opacizzo l’unghia in modo che il colore aggrappi meglio.

Colore

Prima di cominciare a parlare dei colori voglio ricordarvi che non bisogna MAI polimerizzare.

Stendo con un pennello i colori con cui voglio creare lo sfondo.

All’inizio potrebbe non riuscirvi perchè in questo decoro è importante saper dosare la quantità di prodotto usata. Non bisogna metterne troppo, neppure troppo poco.

Uso il nero per fare il centro del fiore e due differenti tonalità di rosso per il resto del fiore.

Con lo stesso pennello, pulito dai colori precedenti, inizio delicatamente a sfumare in diagonale i colori tra di loro.

Petali

Con un pennello un po’ più piccolo, prelevo una piccola quantità di bianco.

Sempre con delicatezza, stendo il colore sulla base. Essa non è polimerizzata, quindi farà miscelare il bianco con lo sfondo, creando una sfumatura e una semi trasparenza.

Continuo così con tutti i petali che voglio realizzare.

Mano a mano, per i petali in primo piano, prelevo più prodotto, in modo possano risaltare maggiormente.

Se voglio un effetto più in trasparenza, prelevo meno prodotto e lo tiro di più, se invece voglio più coprenza, uso più colore e sfumo di meno.

Altri colori

Se ci piace, possiamo aggiungere un po’ di altri colori ai petali.

Io ho scelto il giallo, in modo da dare più luminosità.

Contorni

Sempre sul prodotto non polimerizzato, con un pennellino fine, realizzo alcuni contorni dei petali, sia col bianco, sia col nero.

Puntini

Con un dotter, eseguo sulla zona nera, i puntini.

Scelgo di usare il nero, il bianco e anche un po’ di giallo, in modo da richiamare il colore sui petali.

Quando sono soddisfatta del risultato allora metto in lampada e catalizzo.

In fine applico un top coat e la nail art è finita.

Vi piace il risultato?

Non preoccupatevi se il risultato non viene bene ai primi tentativi, io ci ho provato tre volte, prima di ottenere questo risultato.

Con la pratica otterrete dei bei risultati!

Questo articolo è finito, se vi è piaciuto lasciate like e condividetelo!

Non dimenticatevi di seguirmi su Instagram e sul mio canale Youtube!

Alla prossima.

SOFIA

I try for the first time the Wet on wet nail art

Welcome back to my blog!

Today I want to show you how I made nails on the Wet on Wet technique for the first time.

Let’s begin!

What’s this

The wet on wet technique, involves the use of gel colors, one on top of the other, without curing at each step.

Doing so creates beautiful shades between the colors used.

You can draw whatever you want, but I decided to create a flower.

Base

In this case I perform the decoration on a tip, so I opacify the nail so that the color clings better.

Color

Before I start talking about colors, I want to remind you that you should NEVER cure.

I spread the colors with which I want to create the background with a brush.

At the beginning it may not succeed because in this decoration it is important to know how to dose the quantity of product used. You don’t have to put too much, not even too little.

I use black for the center of the flower and two different shades of red for the rest of the flower.

With the same brush, cleaned from the previous colors, I gently begin to shade the colors diagonally between them.

Petals

With a slightly smaller brush, I take a small amount of white.

Always gently, spread the color on the base. It is not cured, so it will mix the white with the background, creating a gradient and a semi transparency.

I continue with all the petals that I want to make.

Gradually, for the petals in the foreground, I take more product, so they can stand out more.

If I want a more transparent effect, I take less product and pull it more, if instead I want more coverage, I use more color and less shade.

Other colors

If we like, we can add some other colors to the petals.

I chose yellow, in order to give more brightness.

Outlines

Still on the uncured product, with a fine brush, I make some outlines of the petals, both with white and with black.

Dots

With a dotter, I make on the black area, the dots.

I choose to use black, white and even a little yellow, in order to recall the color on the petals.

When I am satisfied with the result then I put on the lamp and cure.

Finally I apply a top coat and the nail art is over.

Do you like the result?

Do not worry if the result is not good on the first attempts, I tried three times before getting this result.

With practice you will get good results!

This article is finished, if you liked it, leave it like and share it!

Don’t forget to follow me on Instagram and on my Youtube channel!

Until next time.

SOFIA

Come disegnare sulle unghie

Bentornati sul mio blog!
Oggi voglio darvi alcuni consigli su come poter realizzare su un unghia un disegno con i colori acrilici, come se foste sulla carta!

Iniziamo

Base

Io uso come riferimento di quel che sto parlando il disegno di sailor moon che ho realizzato su una tip.

Per cominciare dobbiamo creare la nostra base, su cui disegneremo.
Solitamente io scelgo colori chiari, in modo che i colori poi risalteranno al massimo.
Dopo di che passo uno strato di lucido e poi con un buffer opacizzo la mia struttura, in modo da permettere una migliore adesione tra base e pittura.

Bozza

Dopo che avete scelto il vostro disegno, prendete una matita e molto delicatamente tracciate una bozza di ciò che volete fare.
Questo serve sia ad utilizzare al meglio il piccolo spazio dell’unghia, sia per tracciare i contorni di quel che vorrete realizzare.

Colori

Sempre seguendo la nostra reference, ci creiamo la palette colori.
Cerchiamo di avvicinarci il più possibile a quelli originali.
Dopo di che, consiglio di stendere i colori in base.. Al colore.
Mi spiego meglio.
Se è presente una grande porzione di rosso, o giallo, prima sento quello e lo lascio asciugare.
Dopo di che si può passare a creare la sfumatura di quella sezione, alternando sfumature più chiare e scure.

Dettagli

Una volta fatto asciugare bene il tutto, inizio con la realizzazione dei dettagli, quelli che hanno bisogno di più precisione e spesso sono più piccoli.

Contorni

Una volta che siamo soddisfatti del disegno, prima di fare i controni lo sigilliamo e ripoacizziamo.
In questo modo se sbagliassimo a fare una linea, o la facessimo troppo spessa, potremmo semplicemente eliminarla senza rovinare tutto il resto del disegno.

Una volta che il risultato è di nostro gradimento, possiamo sigillare il tutto, e il nostro disegno è fatto!

Questo articolo giunge al termine.
Spero vi sia stato utile e vi abbia dato qualche trucchetto che ancora non conoscevate.
Penso che anche chi non sia bravissimo a disegnare, seguendo una linea guida, possa creare qualcosa di carino.

Se questo articolo vi è piaciuto, lasciate un like e commentate.

Non dimenticatevi di seguirmi su Instagram e sul mio canale YouTube.

Alla prossima!

SOFIA

How to create a drawing on a nail

Welcome back to my blog!
Today I want to give you some advice, on how to make a design with acrylic paints on a nail, as if you were on paper!

Let’s begin

Base

I use as a reference of what I am talking about the sailor moon design I made on a tip.

To begin with we need to create our base, on which we will draw.
Usually I choose light colors, so that the colors will then stand out to the maximum.
After that I apply a layer of top coat and then with a buffer I opacify my structure, so as to allow a better adhesion between the base and the paint.

Draft

After you have chosen your design, take a pencil and with a very gently touch draw a sketch of what you want to do.
This serves both to better use the small space of the nail, and to trace the contours of what you want to achieve.

Colors

Always following our reference, we create the color palette.
We try to get as close as possible to the original ones.
After that, I suggest to spread the colors on the base.
I’ll explain.
If there is a large portion of red, or yellow, I first put that and let it dry.
After that you can move on to create the nuance of that section, alternating lighter and darker shades.

Details

Once everything is well dried, I start by creating details, those that need more precision and are often smaller.

Outlines

Once we are satisfied with the design, we seal it and using a buffer we matt again the surface.
In this way, if we fail to make a line, or make it too thick, we could simply eliminate it without ruining the rest of the design.

Once the result is to our liking, we can seal everything, and our design is done!

This article comes to an end.
I hope it has been useful and has given you some tricks that you didn’t know yet.
I think even those who are not very good at drawing, following a guideline, can create something nice.

If you liked this article, leave a like and comment.

Don’t forget to follow me on Instagram and on my YouTube channel.

Until next time!

SOFIA