Archivi tag: gel

What type of product to use for each type of nail

Welcome back to my blog!

Today I want to explain which products are best to use on each type of nail.

If you want to know which nails exist, I leave you the link of the article where I was talking about it.

Let’s start!

Healthy Nails

For these nails that do not present any type of problem, you can choose any gel, as desired by the operator.

We have the choice between a more flexible and a more rigid gel, also the density can be higher or lower.

This is possible because the nail being elastic and resistant will be able to follow the product.

Thin nails

For these nails, sometimes even very fragile, it is better to use more flexible and porous gels, so that they can follow the natural movement of the surface, so as not to cause lifting.

A medium-high density is recommended, so that the product can be processed without haste.

Acrygel is also an excellent product for the treatment of these nails.

Onychophagic nails

These nails may be thicker or thinner, but in any case it is good to use rather stiff gels, so that people will not be able to bite or break it.

I recommend the use of gels with glass fibers inside them, in order to guarantee a better seal.

Nails that go down

Still speaking generally, these types of nails are quite robust.

Since we have to correct the fact that they grow downwards, we should use high density gels, so that they allow us to create a thickness on the tip.

These gels will still have to be elastic and porous.

Nails that go upwards

These nails are thin. There is a need for high density gels, thixotropic ones are excellent, which are stiff in the jar but if you work them they soften.

Also in this case it is excellent to use elastic gels, because the nail growing upwards will make pressure close to the cuticle, causing possible lifting if a suitable gel is not used.

Here is the list of products that I recommend to use, obviously everyone can choose what they prefer!

If you liked this article, leave a like and share.

Don’t forget to follow me on Instagram and on my youtube channel.

See you next time!

SOFIA

Come realizzare la french 3D

Bentornati sul mio blog!
Oggi voglio spiegarvi come realizzare la french 3D.
Iniziamo!

Cos’è

La french 3D, è una decorazione che crea un effetto di ombre e profondità, realizzata come una french manicure.


Prodotti

Inizio subito dicendo quali prodotti consiglio di usare.
Siccome bisogna realizzare parecchi muretti, sconsiglio di usare il gel.
Io ho provato varie volte ad usarlo, ma i risultati sono pessimi.
Anche usando un gel poco autolivellante, il muretto non verrà mai ben definito.
Consiglio invece di usare l’acrilico, o il polygel, cone ho fatto io.
La realizzazione sarà molto più facile e veloce.

Ricostruzione

Io mi aiuterò con una mano finta.
Dopo aver opacizzato e preparato la mia unghia, eseguo l’allungamento, della forma e lunghezza che desidero.

Muretto rosa

Dobbiamo quindi lavorare con un french inverso profondo.
Realizzo quindi il mio primo muretto, con il polygel rosa.
Una volta polimerizzato, limo accuratamente la forma.

Colore

Dopo di che, applichiamo il colore sul muretto che si è formato e disegnamo la solita lunetta del french.


Muretto trasparente

Una volta che è stato polimerizzato il colore, lo ricopro con il polygel trasparente.
Mi assicuro di coprire il colore e creare abbastanza spessore, per poi poterlo limare.
Polimerizzo e limo di nuovo, per definirne la forma.


Ripeto i passaggi

Quindi bisogna ripetere gli stessi passaggi, fino a quando non siamo soddisfatti del nostro lavoro. È consigliato usare colori chiari, in modo da far notare maggiormente l’ombra che si viene a creare.


Struttura

Di sicuro una volta finito tutto ciò, la struttura risulterà più spessa di quanto dovrebbe essere.

Limiamo quindi la superficie dell’unghia.
Stiamo attenti però a non limare troppo, sennò rischiamo di eliminare il colore, rovinando la nail art.


Una volta finito tutto ciò, sigillo e il design è fatto!
Vi piace?
Non preoccupatevi se al primo tentativo non vi viene, io ci ho messo un po’ prima di capire come fare e quali prodotti usare, e ancora non mi viene perfettamente.
Di sicuro con la pratica miglioreró e di sicuro anche voi ci riuscirete.

Se questo articolo vi è piaciuto, lasciate un like e commentate!

Non dimenticate di seguirmi su Instagram e sul mio canale YouTube.

Alla prossima!

SOFIA

How to create 3D French

Welcome back to my blog!
Today I want to explain how to make French 3D.
Let’s begin!

What’s this

French 3D is a decoration that creates an effect of shadows and depth, made like a French manicure.

Products

I start immediately by saying which products I recommend to use.
Since you have to build several walls, I do not recommend using the gel.
I have tried several times to use it, but the results are bad.
Even using an harder gel, the wall will never be well defined.
I recommend instead of using acrylic, or polygel, as I did.
The realization will be much easier and faster.

Sculpting

I will help myself with a fake hand.
After having made opaque and prepared my nail, I create the nail, of the shape and length I want.

Pink wall

We must therefore work with a deep reverse French.
So I build my first wall, with pink polygel.
Once cured, I carefully define the shape.

Color

After that, I apply the color on the wall that has formed and I also draw the usual French smile line.

Clear wall

Once the color has been cured, I cover it with transparent polygel.
I make sure to cover the color and create enough thickness, to be able to file it.
I polymerize and define again the shape.

I repeat the steps

So we have to repeat the same steps, until we are satisfied with our work. It is recommended to use light colors, in order to make the shadow that is created more visible.

Structure

Certainly once all this is finished, the structure will be thicker than it should be.

So let’s file the nail surface.
We have to be careful in order not to file too much, otherwise we risk eliminating the color, ruining the nail art.

Once all this is done, seal and the design is done!

You like it?
Don’t worry if you don’t get it on the first try, it took me a while to figure out how to make and which products to use, and it still doesn’t come perfectly.
Certainly with practice I will improve and for sure you too will succeed.

If you liked this article, leave a like and comment!

Don’t forget to follow me on Instagram and on my YouTube channel.

See you next time!

SOFIA

Come realizzare il babyboomer

Bentornati sul mio blog!

Oggi voglio spiegarmi come io realizzo praticamente il baby boomer.

Iniziamo

Cos’è

Il baby boomer è un decoro che in questo ultimo anno è andato molto di moda.

È caratterizzato da una base rosa, che presenta sul margine libero una sfumatura eseguita con il bianco.

Si può realizzare sia in struttura che superficialmente.

Oggi vi spiego come farlo in modo facile in superficie.

Ricostruzione

Bisogna innanzitutto cominciare creando una ricostruzione, o comunque ad essere pronti per realizzare una copertura.

Io mi sono aiutata con la mia mano finta e ho eseguito una piccola ricostruzione dalla forma squadrata.

Cover rosa

Dopo di che, eseguo la mia struttura con un cover rosa, non troppo coprente.

Il mio presenta i brillantini, che danno un tocco il più al baby boomer.

Sfumatura

Dopo di che utilizzo un gel color bianco molto coprente e lo prelevo con il dito.

Inizio a picchiettarlo inizialmente dove voglio far finire la mia sfumatura, e lo sfumo bene, fin al margine libero.

Una volta che è ben sfumato, polimerizzo.

Siccome bisogna creare maggiore intensità sulla punta, ripeto il passaggio, iniziando a sfumare più in basso rispetto alla prima volta, invece tengo più intenso sulla punta.

Ripeto questi passaggi finché la sfumatura è bella e graduale.

Cover rosa

Una volta polimerizzato il bianco, applico uno strato abbastanza tirato, quasi come se fosse uno smalto, di cover rosa, per amalgamare ancora di più il tutto.

Una volta fatto polimerizzo.

Io preferisco dare la forma dopo aver fatto questi passaggi dunque limo il margine libero.

Quando sono soddisfatta passo il lucido e il gioco è fatto!

Questo articolo è finito, vi è stato utile? Io ho fatto molti tentativi prima di riuscire a capire come realizzarlo in modo facile e veloce.

Se questo articolo vi è piaciuto, lasciate un like e condividete.

Non dimenticatevi di seguirmi su Instagram e sul mio canale YouTube !

Alla prossima!

SOFIA

How to create easily baby boomer

Welcome back to my blog!

Today I want to explain how I practically make the baby boomer.

Let’s begin

What’s this

The baby boomer is a decoration that in this last year has been very popular.

It is characterized by a pink base, which has a shade of white on the free edge.

It can be realized both in structure and superficially.

Today I explain to you how to do it easily in surface.

Reconstruction

We must first start by creating a reconstruction, or at least be ready to make a cover the natural nail.


I helped myself with my fake hand and created a small, square-shaped reconstruction.

Pink cover

After that, I do my structure with a pink cover, not too opaque.


Mine presents glitter, which give baby boomer most light.

Shade

After this, I use a very opaque white gel and take it with my finger.


I start tapping him initially where I want to finish my nuance, and I blur it well, to the free margin.

Once it is well shaded, I polymerize.


Since we need to create more intensity on the tip, I repeat the passage, starting to fade lower than the first time, instead I keep it more intense on the tip.


I repeat these steps until the nuance is beautiful and gradual.


Pink cover

Once the white is cured, I apply a fairly tight layer of pink cover, almost as if it is polish, to amalgamate the whole thing even more.

Then I cure.

I prefer to give the shape after making these steps.

When I am satisfied I pass the polish and you’re done!
This article is finished, was it useful? I made many attempts before I could figure out how to do it quickly and easily.

If you liked this article, leave a like and share.

Don’t forget to follow me on Instagram and on my YouTube channel!

Until next time!

SOFIA

Come mantenere bella una ricostruzione

Ciao a tutti!

Oggi nuovo articolo. Voglio darvi consigli e spiegarvi come mantenere durante le ipotetiche 3 settimane, o di più, le unghie ricostruite belle.

Iniziamo!

Usare le unghie con delicatezza

Probabilmente per chi non ha mai avuto la unghie lunghe e all’improvviso se le ritrova di 2 centimetri, all’inizio sarà difficile imparare a gestirle e conviverci.

Inizialmente si potrebbero prendere parecchie botte, ma quello non è un problema perché se una ricostruzione è eseguita bene, seguendo i corretti canoni, ci saranno maggiori probabilità che non si rompa.

Il problema è quando si usano le unghie ricostruite come se non ce le avessimo.

Non fraintendetemi, potete fare tutto però bisogna avere qualche accortezza in più

L’importante è usare le unghie con delicatezza e non come attrezzi.

Evitate di usarle come leve, e se avete dubbi su come vivere con le unghie lunghe, leggete questo articolo dove vi do qualche consiglio su come gestirle.

Prodotti chimici

Noi donne, giovani o più mature, prima o dopo avremo a che fare con i prodotti chimici, che possono essere quelli per pulire casa, per il bucato o non so, prodotti chimici usati per particolari lavori.

Se si sa che se ne fa spesso uso, per preservare la lucidità e l’integrità sarebbe meglio indossare dei guanti.

I prodotti aggressivi potrebbero compromettere la ricostruzione, causando opacità del top coat o magari sollevamenti.

Mani in bocca

Questo vale sia per per le persone onicofagiche che di abitudine hanno le mani in bocca, ma anche per le persone che non hanno questa abitudine.

Magari si è nervosi o sovrappensiero e si portano le unghie alla bocca.

Sempre al fine di mantenere una ricostruzione perfetta durante il tempo, sconsoglio di giocherellare e mordicchiare le vostre unghie.

Comunque i prodotti come gel e acrilico sono duri e potreste causarvi danni ai denti o comunque ingerire piccole parti di prodotto e non è salutare.

Non strappare le unghie

Un’altra cosa fondamentale per mantenere le unghie sane è quello di non strappare le unghie.

La tentazione potrebbe insorgere se come dicevo prima, abbiamo le mani in bocca, ma anche se ci sono dei piccoli sollevamenti.

Non strappate mai i sollevamenti o le unghie sollevate, sia per non eliminare importanti strati delle vostre unghie, ma anche per facilitare poi il lavoro dell’operatrice.

Se strappate una o più unghie, poi le toccherà ricostruirla, impiegando più tempo del previsto.

Rispettare i Refill

Per ultima metto penso la cosa più importante.

Per evitare sollevamenti e rotture di unghie, è importantissimo rispettare i tempi del refill.

Ogni circa 3-4 settimane è importante tornare dell’operatrice per ribilanciare la bombatura e quindi assicurarsi la salute delle proprie unghie.

Ovviamente potrebbero esserci persone tipo le onicofagiche che ogni 15 giorni devono presentarsi nel salone, perché è sempre meglio tenerle sotto controllo.

Se non si rispettano questi tempi, si rischia di presentare principalmente sollevamenti che potrebbero causare infiltrazioni di acqua, e comunque creare il territorio ideale per la crescita di batteri.

Inoltre più l’unghia cresce, più la bombura avanza e non protegge bene il punto do stress, questo si può tradurre in rotture di unghie, sia solo il prodotto ma anche la lamina, e vi assicuro che è molto doloroso.

L’articolo di oggi giunge al termine. Spero che con questi consigli riuscirete a tenere meglio le vostre ricostruzioni sia per preservare la salute delle vostre unghie ma anche per facilitare e fare felice la vostra onicotecnica.

Se questo articolo vi è piaciuto lasciate un like e condividete.

Non dimenticatevi di seguirmi su Instagram e sul mio canale YouTube

Alla prossima.

SOFIA

How to maintain a full set during time

Hello everyone!

Today new article. I want to give you advice and explain how to maintain beautiful reconstructed nails during the hypothetical 3 weeks, or more.

Let’s begin!

Use your nails gently

Probably for those who have never had long nails and suddenly if they find them 2 centimeters, at first it will be difficult to learn how to manage them and live with them.

Initially it could take a lot of hits, but that is not a problem because if a reconstruction is done well, following the correct canons, there will be a greater chance that it will not break.

The problem is when we use reconstructed nails as if we don’t have them.

Don’t get me wrong, you can do everything, however you need to have some more precautions

The important thing is to use the nails gently and not as tools.

Avoid using them as levers, and if you have doubts about how to live with long nails, read this article where I give you some advice on how to manage them.

Chemical products

We women, young or more mature, sooner or later we will have to deal with chemicals, which can be those for cleaning the house, for laundry or I don’t know, chemicals used for particular jobs.

If you known that you will use them often, it is better to wear gloves to maintain clarity and integrity.

Aggressive products could compromise the reconstruction, causing top coat opacity or maybe lifting.

Hands in your mouth

This applies both to onychophagic that are people who have their hands in their mouths constantly, but also to people who do not have this habit.

Maybe you are nervous or thoughtless and bring your nails to your mouth.

Always in order to maintain a perfect reconstruction over time, I recommend you not to fiddle and nibble your nails.

However products like gel and acrylic are hard and you could cause damage to your teeth or otherwise ingest small parts of the product and it is not healthy.

Don’t tear your nails

Another key thing to keep your nails healthy is not to tear your nails.

The temptation could arise if, as I said before, we have our hands in the mouth, but even if there are small lifts.

Never tear off the lifts or raised nails, in order not to eliminate important layers of your nails, but also to facilitate the work of the operator.

If you tear off one or more nails, then you will have to rebuild them, taking the process longer than expected.

Respect the Refills

Last of all, I think the most important thing.

To avoid lifting and breaking nails, it is very important to respect the refill times.

Every 3-4 weeks it is important to return to the operator to rebalance the apex and thus ensure the health of your nails.

Obviously there could be people like the onychophagics who must show up in the salon every 15 days, because it is always better to keep them under control.

If these times are not respected, there is a risk of presenting mainly lifts that could cause water infiltration, and in any case create the ideal territory for the growth of bacteria.

Furthermore, the more the nail grows, the more the apex advances and does not protect the stress point well, this can translate into broken nails, both only the product but also the surface, and I assure you that it is very painful.

Today’s article comes to an end. I hope that with these tips you will be able to better maintain your reconstructions both to preserve the health of your nails but also to facilitate and make your nail technician happy.

If you liked this article, leave a like and share.

Don’t forget to follow me on Instagram and on my YouTube channel

Until next time.

SOFIA

How to prepare the natural nail

Welcome back to my blog!

 Today I want to explain how to prepare the natural nail in the best way, so that the product adheres well during the duration of the whole treatment.

 Let’s begin! 

Wash your hands

 A tip I give you is to have the customer wash their hands as soon as they arrive.

 Like all of us, we touch many things so dirt and bacteria settle on the nail. By making them wash their hands, we clean their surface even more, removing any grease residue that is present on the nail. 

After that it is always good to disinfect the nails with a suitable product.

 Cuticle removal

 I start by saying that products such as gel and gel polishes, are specifically designed to adhere to the nail, not the skin.

 For this reason it is very important not to touch the skin, and to eliminate the cuticles.

 Initially you have to push with the pusher, and if you don’t have an e-file, with the “cutting” part you have to be very careful to remove them all. 

If, on the other hand, you also have the drill, you could make a more accurate preparation because in addition to manually removing them, with a diamond bit we could remove the cuticles more deeply. 

Matt

 After that, with a 240 file we gently matt the surface of the nail. In the meantime, with this step, we will still remove any cuticle residue, and open the nail blades, so that the product can cling better.

 In addition, if you have an e-file, always with a diamond bit, you could reach points that you cannot achieve with the file

It is important, however, not to file the nail too much. If you file too much, the nail plate is thinned, which in its lower layers is more humid. 

Therefore the opposite effect would be obtained, that is lifting. 

Do not touch the nail 

During all these steps it is very important not to touch the nail, especially with the fingertips. 

The purpose of the preparation is to remove the fatty parts of the nail, to opacify it.

 If we touch it we will nullify all the previous steps.

Nail prep and primer

 After preparing the nail, primers must be applied. It is not necessary to apply more than necessary, otherwise they will not help adhesion, on the contrary they will make it more difficult, causing possible lifting.

 We have come to the end of this article, I hope you enjoyed it and made you understand how to prepare the nail well. 

If you liked this article, leave a like and share it. 

Don’t forget to follow me on Instagram and YouTube. 

Until next time

 SOFIA

Come disegnare sulle unghie

Bentornati sul mio blog!
Oggi voglio darvi alcuni consigli su come poter realizzare su un unghia un disegno con i colori acrilici, come se foste sulla carta!

Iniziamo

Base

Io uso come riferimento di quel che sto parlando il disegno di sailor moon che ho realizzato su una tip.

Per cominciare dobbiamo creare la nostra base, su cui disegneremo.
Solitamente io scelgo colori chiari, in modo che i colori poi risalteranno al massimo.
Dopo di che passo uno strato di lucido e poi con un buffer opacizzo la mia struttura, in modo da permettere una migliore adesione tra base e pittura.

Bozza

Dopo che avete scelto il vostro disegno, prendete una matita e molto delicatamente tracciate una bozza di ciò che volete fare.
Questo serve sia ad utilizzare al meglio il piccolo spazio dell’unghia, sia per tracciare i contorni di quel che vorrete realizzare.

Colori

Sempre seguendo la nostra reference, ci creiamo la palette colori.
Cerchiamo di avvicinarci il più possibile a quelli originali.
Dopo di che, consiglio di stendere i colori in base.. Al colore.
Mi spiego meglio.
Se è presente una grande porzione di rosso, o giallo, prima sento quello e lo lascio asciugare.
Dopo di che si può passare a creare la sfumatura di quella sezione, alternando sfumature più chiare e scure.

Dettagli

Una volta fatto asciugare bene il tutto, inizio con la realizzazione dei dettagli, quelli che hanno bisogno di più precisione e spesso sono più piccoli.

Contorni

Una volta che siamo soddisfatti del disegno, prima di fare i controni lo sigilliamo e ripoacizziamo.
In questo modo se sbagliassimo a fare una linea, o la facessimo troppo spessa, potremmo semplicemente eliminarla senza rovinare tutto il resto del disegno.

Una volta che il risultato è di nostro gradimento, possiamo sigillare il tutto, e il nostro disegno è fatto!

Questo articolo giunge al termine.
Spero vi sia stato utile e vi abbia dato qualche trucchetto che ancora non conoscevate.
Penso che anche chi non sia bravissimo a disegnare, seguendo una linea guida, possa creare qualcosa di carino.

Se questo articolo vi è piaciuto, lasciate un like e commentate.

Non dimenticatevi di seguirmi su Instagram e sul mio canale YouTube.

Alla prossima!

SOFIA

How to create a drawing on a nail

Welcome back to my blog!
Today I want to give you some advice, on how to make a design with acrylic paints on a nail, as if you were on paper!

Let’s begin

Base

I use as a reference of what I am talking about the sailor moon design I made on a tip.

To begin with we need to create our base, on which we will draw.
Usually I choose light colors, so that the colors will then stand out to the maximum.
After that I apply a layer of top coat and then with a buffer I opacify my structure, so as to allow a better adhesion between the base and the paint.

Draft

After you have chosen your design, take a pencil and with a very gently touch draw a sketch of what you want to do.
This serves both to better use the small space of the nail, and to trace the contours of what you want to achieve.

Colors

Always following our reference, we create the color palette.
We try to get as close as possible to the original ones.
After that, I suggest to spread the colors on the base.
I’ll explain.
If there is a large portion of red, or yellow, I first put that and let it dry.
After that you can move on to create the nuance of that section, alternating lighter and darker shades.

Details

Once everything is well dried, I start by creating details, those that need more precision and are often smaller.

Outlines

Once we are satisfied with the design, we seal it and using a buffer we matt again the surface.
In this way, if we fail to make a line, or make it too thick, we could simply eliminate it without ruining the rest of the design.

Once the result is to our liking, we can seal everything, and our design is done!

This article comes to an end.
I hope it has been useful and has given you some tricks that you didn’t know yet.
I think even those who are not very good at drawing, following a guideline, can create something nice.

If you liked this article, leave a like and comment.

Don’t forget to follow me on Instagram and on my YouTube channel.

Until next time!

SOFIA