Archivi tag: disegno

Come realizzare la french 3D

Bentornati sul mio blog!
Oggi voglio spiegarvi come realizzare la french 3D.
Iniziamo!

Cos’è

La french 3D, è una decorazione che crea un effetto di ombre e profondità, realizzata come una french manicure.


Prodotti

Inizio subito dicendo quali prodotti consiglio di usare.
Siccome bisogna realizzare parecchi muretti, sconsiglio di usare il gel.
Io ho provato varie volte ad usarlo, ma i risultati sono pessimi.
Anche usando un gel poco autolivellante, il muretto non verrà mai ben definito.
Consiglio invece di usare l’acrilico, o il polygel, cone ho fatto io.
La realizzazione sarà molto più facile e veloce.

Ricostruzione

Io mi aiuterò con una mano finta.
Dopo aver opacizzato e preparato la mia unghia, eseguo l’allungamento, della forma e lunghezza che desidero.

Muretto rosa

Dobbiamo quindi lavorare con un french inverso profondo.
Realizzo quindi il mio primo muretto, con il polygel rosa.
Una volta polimerizzato, limo accuratamente la forma.

Colore

Dopo di che, applichiamo il colore sul muretto che si è formato e disegnamo la solita lunetta del french.


Muretto trasparente

Una volta che è stato polimerizzato il colore, lo ricopro con il polygel trasparente.
Mi assicuro di coprire il colore e creare abbastanza spessore, per poi poterlo limare.
Polimerizzo e limo di nuovo, per definirne la forma.


Ripeto i passaggi

Quindi bisogna ripetere gli stessi passaggi, fino a quando non siamo soddisfatti del nostro lavoro. È consigliato usare colori chiari, in modo da far notare maggiormente l’ombra che si viene a creare.


Struttura

Di sicuro una volta finito tutto ciò, la struttura risulterà più spessa di quanto dovrebbe essere.

Limiamo quindi la superficie dell’unghia.
Stiamo attenti però a non limare troppo, sennò rischiamo di eliminare il colore, rovinando la nail art.


Una volta finito tutto ciò, sigillo e il design è fatto!
Vi piace?
Non preoccupatevi se al primo tentativo non vi viene, io ci ho messo un po’ prima di capire come fare e quali prodotti usare, e ancora non mi viene perfettamente.
Di sicuro con la pratica miglioreró e di sicuro anche voi ci riuscirete.

Se questo articolo vi è piaciuto, lasciate un like e commentate!

Non dimenticate di seguirmi su Instagram e sul mio canale YouTube.

Alla prossima!

SOFIA

How to create 3D French

Welcome back to my blog!
Today I want to explain how to make French 3D.
Let’s begin!

What’s this

French 3D is a decoration that creates an effect of shadows and depth, made like a French manicure.

Products

I start immediately by saying which products I recommend to use.
Since you have to build several walls, I do not recommend using the gel.
I have tried several times to use it, but the results are bad.
Even using an harder gel, the wall will never be well defined.
I recommend instead of using acrylic, or polygel, as I did.
The realization will be much easier and faster.

Sculpting

I will help myself with a fake hand.
After having made opaque and prepared my nail, I create the nail, of the shape and length I want.

Pink wall

We must therefore work with a deep reverse French.
So I build my first wall, with pink polygel.
Once cured, I carefully define the shape.

Color

After that, I apply the color on the wall that has formed and I also draw the usual French smile line.

Clear wall

Once the color has been cured, I cover it with transparent polygel.
I make sure to cover the color and create enough thickness, to be able to file it.
I polymerize and define again the shape.

I repeat the steps

So we have to repeat the same steps, until we are satisfied with our work. It is recommended to use light colors, in order to make the shadow that is created more visible.

Structure

Certainly once all this is finished, the structure will be thicker than it should be.

So let’s file the nail surface.
We have to be careful in order not to file too much, otherwise we risk eliminating the color, ruining the nail art.

Once all this is done, seal and the design is done!

You like it?
Don’t worry if you don’t get it on the first try, it took me a while to figure out how to make and which products to use, and it still doesn’t come perfectly.
Certainly with practice I will improve and for sure you too will succeed.

If you liked this article, leave a like and comment!

Don’t forget to follow me on Instagram and on my YouTube channel.

See you next time!

SOFIA

Come disegnare sulle unghie

Bentornati sul mio blog!
Oggi voglio darvi alcuni consigli su come poter realizzare su un unghia un disegno con i colori acrilici, come se foste sulla carta!

Iniziamo

Base

Io uso come riferimento di quel che sto parlando il disegno di sailor moon che ho realizzato su una tip.

Per cominciare dobbiamo creare la nostra base, su cui disegneremo.
Solitamente io scelgo colori chiari, in modo che i colori poi risalteranno al massimo.
Dopo di che passo uno strato di lucido e poi con un buffer opacizzo la mia struttura, in modo da permettere una migliore adesione tra base e pittura.

Bozza

Dopo che avete scelto il vostro disegno, prendete una matita e molto delicatamente tracciate una bozza di ciò che volete fare.
Questo serve sia ad utilizzare al meglio il piccolo spazio dell’unghia, sia per tracciare i contorni di quel che vorrete realizzare.

Colori

Sempre seguendo la nostra reference, ci creiamo la palette colori.
Cerchiamo di avvicinarci il più possibile a quelli originali.
Dopo di che, consiglio di stendere i colori in base.. Al colore.
Mi spiego meglio.
Se è presente una grande porzione di rosso, o giallo, prima sento quello e lo lascio asciugare.
Dopo di che si può passare a creare la sfumatura di quella sezione, alternando sfumature più chiare e scure.

Dettagli

Una volta fatto asciugare bene il tutto, inizio con la realizzazione dei dettagli, quelli che hanno bisogno di più precisione e spesso sono più piccoli.

Contorni

Una volta che siamo soddisfatti del disegno, prima di fare i controni lo sigilliamo e ripoacizziamo.
In questo modo se sbagliassimo a fare una linea, o la facessimo troppo spessa, potremmo semplicemente eliminarla senza rovinare tutto il resto del disegno.

Una volta che il risultato è di nostro gradimento, possiamo sigillare il tutto, e il nostro disegno è fatto!

Questo articolo giunge al termine.
Spero vi sia stato utile e vi abbia dato qualche trucchetto che ancora non conoscevate.
Penso che anche chi non sia bravissimo a disegnare, seguendo una linea guida, possa creare qualcosa di carino.

Se questo articolo vi è piaciuto, lasciate un like e commentate.

Non dimenticatevi di seguirmi su Instagram e sul mio canale YouTube.

Alla prossima!

SOFIA

How to create a drawing on a nail

Welcome back to my blog!
Today I want to give you some advice, on how to make a design with acrylic paints on a nail, as if you were on paper!

Let’s begin

Base

I use as a reference of what I am talking about the sailor moon design I made on a tip.

To begin with we need to create our base, on which we will draw.
Usually I choose light colors, so that the colors will then stand out to the maximum.
After that I apply a layer of top coat and then with a buffer I opacify my structure, so as to allow a better adhesion between the base and the paint.

Draft

After you have chosen your design, take a pencil and with a very gently touch draw a sketch of what you want to do.
This serves both to better use the small space of the nail, and to trace the contours of what you want to achieve.

Colors

Always following our reference, we create the color palette.
We try to get as close as possible to the original ones.
After that, I suggest to spread the colors on the base.
I’ll explain.
If there is a large portion of red, or yellow, I first put that and let it dry.
After that you can move on to create the nuance of that section, alternating lighter and darker shades.

Details

Once everything is well dried, I start by creating details, those that need more precision and are often smaller.

Outlines

Once we are satisfied with the design, we seal it and using a buffer we matt again the surface.
In this way, if we fail to make a line, or make it too thick, we could simply eliminate it without ruining the rest of the design.

Once the result is to our liking, we can seal everything, and our design is done!

This article comes to an end.
I hope it has been useful and has given you some tricks that you didn’t know yet.
I think even those who are not very good at drawing, following a guideline, can create something nice.

If you liked this article, leave a like and comment.

Don’t forget to follow me on Instagram and on my YouTube channel.

Until next time!

SOFIA