Archivi tag: consigli

Guida sulla perfetta applicazione di una cartina

Bentornati sul mio blog!

Oggi voglio mostrarvi con delle foto, il metodo per applicare in modo preciso la cartina per la ricostruzione.

Iniziamo!

Per prima cosa do la forma alla cartina piegandola un po’.

Stacco quindi la cartina e applico il bollino dietro.

Questo lo consiglio su cartine non molto rigide, in modo da renderle più resistenti.

Divido quindi le alette.

Misuro la cartina sulla mia unghia e vedo che non combacia bene, quindi mi procuro delle forbici per tagliarla.

Vi consiglio di usare solo un paio di forbici, perchè la colla delle cartine potrebbe rovinare le lame.

Per fare i tagli, devo prendere una misura, ovvero la larghezza massima dei laterali.

Quindi prendo come riferimento quei punti e adatto la forma della cartina alla mia unghia.

Quindi ricontrollo e vedo che ora si adatta perfettamente.

Quindi riprendo la stessa misura sulla cartina e eseguo due tagli laterali a circa 45 gradi. Questo ci aiuterà a stringere bene a cartina da sotto, ottenendo una bella curva c.

Quindi chiudo perfettamente i lembi sotto la cartina.

Ecco come deve apparire da sotto, deve combaciare perfettamente.

Infine controllo frontalmente se la cartina è dritta, se non la fosse, tramite le alette la radrizzo.

Ecco qua la cartina applicata alla perfezione.

Vi è stato utile questo articolo?

Se volete vedere in un video come la applico, vi lascio qui il link!

Spero vi sia piaciuto.

Se questo articolo vi è piaciuto lasciate un like e condividete.

Non dimenticate di seguirmi su Instagram e sul mio canale YouTube!

Alla prossima!

SOFIA

How to place perfectly a nail form

Welcome back to my blog!

Today I want to show you with photos, the method to accurately apply the nail form for the reconstruction.

Let’s start!

First I give the shape to the nail form by folding it a bit.

I then detach the form and apply the little round piece behind it.

I recommend this on not very rigid nail forms, in order to make them more resistant.

So I divide the flaps.

I measure the nail form on my fingernail and I see that it doesn’t fit well, so I get some scissors to cut it.

I advise you to use only a pair of scissors, because the glue from the papers could ruin the blades.

To make the cuts, I have to take a measurement, that is the maximum width of the sidewalls.

So I take those points as a reference and adapt the shape of the nail form to my nail.

So I check again and see that it now fits perfectly.

Then I take the same measurement on the nail form and make two lateral cuts at about 45 degrees. This will help us to tighten well to the nail form from below, obtaining a nice curve c.

So I close the flaps perfectly under the form.

This is how it should look from below, it must fit perfectly.

Finally, I check frontally if the nail form is straight, if not, I straighten it with the flaps.

Here is the nail form applied to perfection.

Was this article helpful to you?

If you want you can see also a video, I leave here the link!

I hope you enjoyed it.

If you liked this article, leave a like and share.

Don’t forget to follow me on Instagram and on my YouTube channel!

See you next time!

SOFIA

Dolori fisici da onicotecniche: consigli per prevenirli e limitarli

Bentornati sul mio blog!

Oggi voglio parlare di un’argomento molto importante, la salute delle onicotecniche.

Questo lavoro ci porta a stare ore e ore sedute, spesso concentrate su un lavoro, tanto che non ci accorgiamo di alcune cattive posture o abitudini abbiamo.

Vedremo cosa è meglio e cosa non è meglio fare, per preservare la nostra salute, e soprattutto ad esempio, la sindrome del tunnel carpale.

Iniziamo!

1.

Dal momento che alcuni problemi possono incorrere dalla torsione scorretta, mantenete gli oggetti ben di fronte a voi, evitate di tendere ad un lato. Inoltre evitate di torcere anche il collo, come se stesse tenendo il telefono con una spalla. La testa dovrebbe essere tenuta dritta e le spalle rilassate.

2.

Evitate di allungarvi, per più di 30 cm, e mantenete gli avambracci paralleli al pavimento. Questa è detta “posizione neutrale”.

3.

Scegliete delle sedie di qualità, preferibilmente quelle rotanti, che abbiano la seduta un po’ più larga delle vostre cosce, e aggiustate la sua altezza, in modo che le cosce siano parallele al pavimento con tutta la superficie dei piedi che tocca per terra.

4.

Non incrociate le gambe e utilizzate tutta la seduta della sedia, senza sedersi lateralmente. Assicuratevi inoltre che essa sia ben imbottita, in modo da non creare pressione sulla parte posteriore delle gambe o ginocchia.

5.

Minimizzate altri punti di pressione, quindi non tenete le braccia sullo spigolo del tavolo. Potete usare della spugna o imbottiture sul bordo del tavolo, in modo da evitare tutto ciò.

6.

Evitate di pendere in avanti o indietro. La testa, il collo e il corpo dovrebbe essere ben dritto, senza torcersi o incurvarsi.

7.

Invece di torcere il vostro corpo, per lavorare, gentilmente posizionate la mano o il piede della cliente in modo che voi siate più confortevoli possibili. Durante le pedicure è importante usare sedie reclinabili che aiutano e supportano bene le gambe della cliente.

8.

Usa un cuscino, da appoggiare sulla zona lombare, in modo da allentare la pressione.

9.

Le mani e i polsi devono essere tenuti dritti, non piegati o storti lateralmente.

10.

Mentre tenete la mano o il dito della cliente, posizionatelo in modo che minimizzate la pressione della tenuta. Tenetela invece in modo delicato e rilassato, per ridurre lo sforzo.

Ecco qua, questi sono alcuni consigli che sicuramente vi faciliteranno il lavoro!

L’articolo di oggi finisce qui, se vi è piaciuto lasciate un like e condividetelo!

Non dimenticatevi di seguirmi su Instagram e sul mio canale youtube.

Alla prossima!

SOFIA

Physical pains of nail technicians: tips to prevent and limit them

Welcome back to my blog!

Today I want to talk about a very important topic, the health of nail technicians.

This job leads us to spend hours and hours sitting, often concentrated on a job, so much so that we don’t notice some bad postures or habits we have.

We will see what is better and what is not better to do, to preserve our health, and especially for example, carpal tunnel syndrome.

Let’s begin!

1.


Since some problems can occur from incorrect twisting, keep the objects well in front of you, avoid tending to one side. Also avoid twisting your neck, as if he were holding the phone with one shoulder. The head should be kept straight and the shoulders relaxed.

2.


Avoid stretching for more than 30 cm and keep your forearms parallel to the floor. This is called “neutral position”.

3.


Choose quality chairs, preferably the rotating ones, which have the seat a little wider than your thighs, and adjust its height, so that the thighs are parallel to the floor with the whole surface of the feet touching the ground.

4.


Do not cross your legs and use the whole seat of the chair, without sitting sideways. Also make sure that it is well padded, so as not to create pressure on the back of the legs or knees.

5.


Minimize other pressure points, so don’t keep your arms on the edge of the table. You can use sponge or padding on the edge of the table, in order to avoid this.

6.


Avoid leaning forward or backward. The head, neck and body should be straight, without twisting or bending.

7.


Instead of twisting your body, to work, kindly position the client’s hand or foot so that you are as comfortable as possible. During pedicures it is important to use reclining chairs that help and support the client’s legs well.

8.


Use a pillow, to be placed on the lower back, in order to release the pressure.

9.


Your hands and wrists should be kept straight, not bent or twisted sideways.

10.


While holding the client’s hand or finger, position it so that you minimize the pressure of the seal. Instead, keep it gently and relaxed to reduce strain.

Here you are, these are some tips that will surely make your job easier!

Today’s article ends here, if you liked it, leave a like and share it!

Don’t forget to follow me on Instagram and on my youtube channel.

See you next time!

SOFIA

How to avoid lifting in a reconstruction

Welcome back to my blog!

Today I want to talk to you about something quite important if we perform nail reconstructions: How to avoid lifting.

Let’s start!

What is a lifting

I start by explaining what lifts are.

As the word suggests, they are lifts that are created between natural nail and product , which can be gel, acrylic or acrigel.

They are recognized for their whitish appearance, as if they were a bubble.

Nail preparation

One of the first phases of a reconstruction is the preparation of the nail plate.

During this process we must pay close attention to how we prepare the nail because most of the time the product is raised is due to a poor nail preparation.

It is very important to push back all the cuticles and eliminate them as best as possible . If the product encounters cuticles, at that point it is very likely to rise.

Furthermore, the surface must be well matted and apply carefully all the preparers : Nail prep, primer and binder.

All these steps are used to create an uneven surface to which the product can cling better, without causing lifting.

Base

As you know, there are various types of gel, including monophasic and three-phase.

Using the monophasic ones, I found almost always product lifts. This is because a product that does everything in one, will be less effective than one designed for its purpose.

For this reason I recommend using a base below your builder , both monophasic and triphasic. This product in addition will further improve the tightness of the product.

Precise application

Another very important thing is the attention paid during the application.

Especially when bulging is created, you need to get as close as possible to cuticles, without ever touching the skin.

If you touch the skin, it’s almost certain that over time, at that point, will create a bubble.

These are the most important things, but obviously during the reconstruction we must avoid going the dust on the nail, or avoid touching it with the fingertip, always for do not alter the prepared structure to accommodate only the gel and prevent it from lifting.

These are the tips to avoid creating lifts. I left out the question of why it is important to remove them once created, but I will soon talk about it in a new article.

If you liked it, leave a like and share and see you soon!

SOFIA

Come evitare i sollevamenti in una ricostruzione

Bentornati sul mio blog!

Oggi voglio parlarvi di una cosa abbastanza importante se eseguiamo ricostruzioni unghie: Come evitare i sollevamenti.

Iniziamo!

Cosa sono

Parto spiegando cosa sono i sollevamenti.

Come suggerisce la parola, sono dei sollevamenti che si creano tra unghia naturale e prodotto, che può essere gel, acrilico o acrigel.

Li si riconoscono per il loro aspetto biancastro, come se fossero una bolla.

Preparazione dell’unghia

Una delle prime fasi di una ricostruzione è la preparazione della lamina ungueale.

Durante questo processo dobbiamo prestare molto attenzione a come prepariamo l’unghia perché la maggior parte delle volte in cui il prodotto si solleva è a causa di una scarsa preparazione delle unghie.

E’ molto importante spingere indietro tutte le cuticole ed eliminarle il meglio possibile. Se il prodotto incontrasse delle cuticole, in quel punto è molto probabile che si sollevi.

Inoltre bisogna opacizzare bene tutta la superficie e applicare accuratamente tutti i preparatori: Nail prep, primer e binder.

Tutti questi passaggi servono a creare una superficie irregolare a cui il prodotto può aggrapparsi meglio, senza causare sollevamenti.

Base

Come sapete esistono vari tipi di gel, tra cui monofasici e trifasici.

Utilizzando quelli monofasici, ho riscontrato quasi sempre sollevamenti del prodotto. Questo perchè un prodotto che fa tutto in uno, risulterà meno efficace di uno studiato apposta per il suo compito.

Per questo vi consiglio l’utilizzo di una base al di sotto del vostro costruttore, sia monofasico che trifasico. Questo prodotto in più migliorerà ulteriormente la tenuta del prodotto.

Applicazione precisa

Un’altra cosa molto importante è l’attenzione prestata durante l’applicazione.

Soprattutto quando si crea la bombatura, bisogna avvicinarsi il più possibile al girocuticole, senza però mai toccare la pelle.

Se si tocca la pelle, è quasi certo che con il tempo in quel punto si creerà una bolla.

Queste sono le cose più importanti, però ovviamente durante la ricostruzione bisogna evitare di far andare la polvere sull’unghia, oppure evitare di toccarla con il polpastrello, sempre per non alterare la struttura preparata per accogliere solamente il gel ed evitare che si sollevi.

Queste sono le dritte per evitare di creare sollevamenti. Ho tralasciato il discorso del perchè è importante rimuoverli una volta creati, ma lo affronterò presto in un nuovo articolo.

Se vi è piaciuto, lasciate un like e condividete e alla prossima!

SOFIA

Other hacks and tricks for nails

Welcome back!

Today I want to talk about other hacks for nails, I leave you here the link of those of the last time.

Let’s start!

Spider gel

A novelty has recently come out, the spider gel.

This gel, as the name suggests, has a particular consistency, very thick and filamentous, like that of a spider web.

Using a dotter, dipping it in the jar, you can create straight lines or very beautiful and fast decorations.

If you have any doubts about how it works, on youtube will surely find many videos about it.

Thinking about this gel, I was reminded of something I already saw and then I realized what it was.

The simple polish, if left to dry in the open air, becomes almost sticky.

I then thought that the same effect could be achieved using polishes.

Just put some nail polish on a surface and wait a few minutes.

Later with a dotter you can pick it up and here is your favorite spider gel!

I made a video where I use this technique, I leave the link here.

Water Decal

Water decals are very thin nail stickers that work like tattoos for children.

Many companies recommend dipping them in water for a few seconds and then removing them from their paper and placing them on the nail.

Using them in this way, however, I noticed that they remain wet, which could prevent proper adhesion on the nail.

My advice is to wet a pad with water and then cover and put the water decal in contact with it. It will become damp, it will detach from its paper, without however being wet.

DIY Dotter

When I was younger I used a lot polishes but I needed the dotters to make decorations. At the time online shopping was not so widespread and not all stores had them.

I had thus found an alternative, which I could make myself at home.

The equipment is a pencil with the rubber on top and the pins for tailors, those with the colored head.

Everything is very simple: just stick the pin in the pencil’s rubber and here is your dotter! 😁

These were the other tricks that came to my mind, I hope they will serve you and like you.

If you liked this article, leave a like and share it!

SOFIA

Altri trucchetti per le unghie

Bentornati!

Oggi voglio parlarvi di altri truchetti per le unghie, vi lascio qua il link di quelli dell’altra volta.

Iniziamo!

Spider gel

Da poco tempo è uscita una novità, lo spider gel.

Questo gel come suggerisce il nome (spider in inglese è ragno) ha una consistenza particolare, molto densa e filamentosa, come quella di una ragnatela.

Utilizzando un dotter, immergendolo nel barattolino, si possono creare delle linee dritte, o comunque decori molto belli e veloci.

Se avete dei dubbi su come funziona, cercando su youtube troverete di sicuro molti video a riguardo.

Pensando a questo gel, mi veniva in mente un qualcosa di già visto e poi ho capito cosa fosse.

Il semplice smalto, se lasciato troppo all’aria aperta, secca, diventa quasi colloso.

Allora ho pensato che si potesse realizzare lo stesso effetto utilizzando lo smalto.

Basta appoggiare dello smalto su una superficie e attendere qualche minuto.

In seguito con un dotter lo si può prelevare ed ecco creato il vostro spider gel preferito!

Ho realizzato un video dove vi mostro come ho fatto, vi lascio qui il link.

Water Decal

I water decal sono degli adesivi per le unghie, molto sottili che funzionano come i tatuaggi per i bambini.

Molte aziende consigliano di immergerli per qualche secondo nell’acqua e poi rimuoverli dalla loro carta e adagiarli sull’unghia.

Utilizzandoli in questo modo ho però notato che rimangono come bagnati, e ciò potrebbe impedire una corretta adesione sull’unghia.

Il mio consiglio è quello di inumidire un pad con dell’acqua e poi coprire e mettere a contatto con esso il water decal. Esso si inumidirà, staccherà dalla sua carta, senza però risultare bagnato.

Dotter fai da te

Quando ero più piccola usavo moltissimo gli smalti normali solo che avevo bisogno dei dotter per creare delle decorazioni. Ai tempi lo shopping online non era così diffuso e non tutti i negozi li avevano.

Avevo così trovato un’alternativa, che potevo realizzare da sola a casa.

L’occorrente è una matita con la gommina sopra e i spilli per sarti, quelli con la capocchia colorata.

Il tutto è semplicissimo: basta incastrare lo spillo nella gomma della matita ed ecco fatto il vostro dotter!😁

Questi erano gli altri trucchetti che mi sono venuti in mente, spero vi serviranno e vi siano piaciuti.

Se questo articolo vi è piaciuto lasciate un like e condividete.

Non dimenticate di seguirmi su Instagram e sul mio canale YouTube!

Alla prossima!

SOFIA

Hacks for nails’ lover

Welcome back to my blog!

Today I want to tell you some tricks that maybe not everyone knows about the nail world!

Let’s start!

Nail polish removal with glitter

To add a bright touch to polishes, the ones studded with glitter are often used, which make a beautiful effect.

The problem arises while removing it.

We spend minutes rubbing with the cotton pad and acetone but the glitters remain attached as if they were glued with cement.

What to do then?

The method I use in these cases is to place the cotton pad on the nail, without rubbing it. Leave it there for about 5 minutes and then press it lightly to remove it.

This pack should facilitate the removal of the much loved but agonized glitter.

After removing everything, apply cuticle oil to moisturize the skin and nail.

If you want there are also glitter polishes that have a peel-off base, that lift up, so as to avoid problems during removal.

Polish lasting

When I applied polish on me people asked me if it was gel, seeing the luster but above all the duration.

In recent years, I often asked people how they applied nail polish and simply replied that they made two coats of color and that’s it.

For an optimal duration of simple polish, it is enough to have a base and a top coat.

I prefer separate bases and top coats instead of all in one.

Applying the base we prepare the nail, leveling it but above all giving it a base on which to cling.

After that apply two thin layers of color and make it dry at each step.

Furthermore, to avoid chipping, it is good to seal the polish to the free edge.

After drying the color, apply a well-laid layer of top coat and you’re done.

Maybe these steps can be obvious, but as I said before, not many people know that the base and the sealant greatly increase the lasting.

I also want to specify that the duration depends on the lifestyle of the people, and also on the underlying nails.

Brush cleaning

Now let’s talk about gel.

In order to use brushes to create layers of colors or decorations, we are forced to immerse them in the jar.

Once finished we use a paper towel to remove the color and the brush seems apparently clean.

But when we then immerse it in another color, we see that the previous one tends to come out.

So how do we get a paint to release completely from a brush?

You can buy the brush cleaner, a product specifically designed for cleaning brushes.

Or simply put on a surface a little bit of transparent gel or a top coat and rub the brush. Obviously you will see the various colors come out. Once the top coat is dirty, we dry the brush and repeat these steps until the top coat remains transparent.

These are the first tricks that I decided to offer you, the second part will be released soon.

If you liked the article, leave a like and share. If you have any questions or requests, do not hesitate to contact me.

See you soon!

SOFIA

Trucchetti per le unghie

Bentornati sul mio blog!

Oggi voglio esporvi alcuni trucchetti che magari non tutti conoscono per quanto riguarda il mondo delle unghie!

Iniziamo!

Rimozione smalto con i glitter

Per aggiungere un tocco luminoso allo smalto spesso si utilizzano quelli tempestati di glitter, che fanno un effetto bellissimo.

Il problema sorge durante la rimozione di esso.

Si passano minuti a strofinare con il dischetto di cotone e l’acetone ma i glitter rimangono attaccati come se fossero stati incollati con il cemento😂.

Cosa fare allora?

Il metodo che utilizzo io in questi casi è quello di appoggiare il dischetto di cotone sull’unghia, senza strofinarlo. Lasciarlo li per 5 minuti circa e poi facendo una leggera pressione rimuoverlo.

Questo impacco dovrebbe facilitare la rimozione dei tanto amati ma agognati glitter.

Dopo aver rimosso tutto, applicate l‘olio per le cuticole, per idratare bene la pelle e l’unghia.

Volendo in commercio hanno creato degli smalti glitter che hanno una base peel-off, ovvero che si solleva, in modo da evitare problemi durante la rimozione.

Durata dello smalto

Quando applicavo su di me lo smalto mi chiedevano se fosse gel, data la lucentezza ma soprattutto vedendo la durata.

In questi anni chiedevo spesso alla gente come applicavano lo smalto e mi rispondevano semplicemente che facevano due passate di colore e basta.

Per una durata ottimale del semplice smalto basta avere una base e un top coat.

Prediligo le basi e i top coat separati invece che quelli tutti in uno.

Applicando la base prepariamo l’unghia, livellandola ma soprattutto dandogli una base sulla quale aggrapparsi.

Dopo di che si applicano due strati sottili di colore, facendoli asciugare ad ogni passaggio.

Inoltre, per evitare sbeccature, è bene sigillare lo smalto al margine libero.

Dopo aver fatto asciugare il colore si applica uno strato ben steso di top coat e il gioco è fatto.

Magari questi passaggi possono essere scontati, ma come dicevo prima, non molti sanno che la base e il sigillante aumentano notevolmente la tenuta.

Voglio anche specificare che la durata dipende dallo stile di vita delle persone, e anche dalle unghie sottostanti.

Pulizia pennelli

Ora parliamo di gel.

Utilizzando i pennelli per realizzare strati di colori o decorazioni, siamo costrette ad immergerli nel barattolo.

Una volta finito utilizziamo uno scottex per rimuovere il colore e il pennello sembra apparentemente pulito.

Però quando poi lo andiamo ad immergere in un altro colore vediamo che tende ad uscire il colore precedente.

Come facciamo allora a far scaricare del tutto un colore da un pennello?

Si può acquistare il brush cleaner, un prodotto indicato apposta per la pulizia dei pennelli.

Oppure semplicemente poniamo su di una superficie del gel trasparente oppure un top coat e lì strofiniamo il pennello in questione. Ovviamente si vedranno i vari colori uscire. Una volta che il top coat è sporco, asciughiamo il pennello e ripetiamo questi passaggi finché il top coat rimarrà trasparente.

Questi sono i primi trucchetti che ho deciso di proporvi, prossimamente uscirà anche la seconda parte.

Se l’articolo vi è piaciuto lasciate un like e condividete. Se avete qualche domanda o richiesta, non esitate a contattarmi.

Se questo articolo vi è piaciuto lasciate un like e condividete.

Non dimenticate di seguirmi su Instagram e sul mio canale YouTube!

Alla prossima!

SOFIA