Archivi tag: base

How to avoid lifting in a reconstruction

Welcome back to my blog!

Today I want to talk to you about something quite important if we perform nail reconstructions: How to avoid lifting.

Let’s start!

What is a lifting

I start by explaining what lifts are.

As the word suggests, they are lifts that are created between natural nail and product , which can be gel, acrylic or acrigel.

They are recognized for their whitish appearance, as if they were a bubble.

Nail preparation

One of the first phases of a reconstruction is the preparation of the nail plate.

During this process we must pay close attention to how we prepare the nail because most of the time the product is raised is due to a poor nail preparation.

It is very important to push back all the cuticles and eliminate them as best as possible . If the product encounters cuticles, at that point it is very likely to rise.

Furthermore, the surface must be well matted and apply carefully all the preparers : Nail prep, primer and binder.

All these steps are used to create an uneven surface to which the product can cling better, without causing lifting.

Base

As you know, there are various types of gel, including monophasic and three-phase.

Using the monophasic ones, I found almost always product lifts. This is because a product that does everything in one, will be less effective than one designed for its purpose.

For this reason I recommend using a base below your builder , both monophasic and triphasic. This product in addition will further improve the tightness of the product.

Precise application

Another very important thing is the attention paid during the application.

Especially when bulging is created, you need to get as close as possible to cuticles, without ever touching the skin.

If you touch the skin, it’s almost certain that over time, at that point, will create a bubble.

These are the most important things, but obviously during the reconstruction we must avoid going the dust on the nail, or avoid touching it with the fingertip, always for do not alter the prepared structure to accommodate only the gel and prevent it from lifting.

These are the tips to avoid creating lifts. I left out the question of why it is important to remove them once created, but I will soon talk about it in a new article.

If you liked it, leave a like and share and see you soon!

SOFIA

Come evitare i sollevamenti in una ricostruzione

Bentornati sul mio blog!

Oggi voglio parlarvi di una cosa abbastanza importante se eseguiamo ricostruzioni unghie: Come evitare i sollevamenti.

Iniziamo!

Cosa sono

Parto spiegando cosa sono i sollevamenti.

Come suggerisce la parola, sono dei sollevamenti che si creano tra unghia naturale e prodotto, che può essere gel, acrilico o acrigel.

Li si riconoscono per il loro aspetto biancastro, come se fossero una bolla.

Preparazione dell’unghia

Una delle prime fasi di una ricostruzione è la preparazione della lamina ungueale.

Durante questo processo dobbiamo prestare molto attenzione a come prepariamo l’unghia perché la maggior parte delle volte in cui il prodotto si solleva è a causa di una scarsa preparazione delle unghie.

E’ molto importante spingere indietro tutte le cuticole ed eliminarle il meglio possibile. Se il prodotto incontrasse delle cuticole, in quel punto è molto probabile che si sollevi.

Inoltre bisogna opacizzare bene tutta la superficie e applicare accuratamente tutti i preparatori: Nail prep, primer e binder.

Tutti questi passaggi servono a creare una superficie irregolare a cui il prodotto può aggrapparsi meglio, senza causare sollevamenti.

Base

Come sapete esistono vari tipi di gel, tra cui monofasici e trifasici.

Utilizzando quelli monofasici, ho riscontrato quasi sempre sollevamenti del prodotto. Questo perchè un prodotto che fa tutto in uno, risulterà meno efficace di uno studiato apposta per il suo compito.

Per questo vi consiglio l’utilizzo di una base al di sotto del vostro costruttore, sia monofasico che trifasico. Questo prodotto in più migliorerà ulteriormente la tenuta del prodotto.

Applicazione precisa

Un’altra cosa molto importante è l’attenzione prestata durante l’applicazione.

Soprattutto quando si crea la bombatura, bisogna avvicinarsi il più possibile al girocuticole, senza però mai toccare la pelle.

Se si tocca la pelle, è quasi certo che con il tempo in quel punto si creerà una bolla.

Queste sono le cose più importanti, però ovviamente durante la ricostruzione bisogna evitare di far andare la polvere sull’unghia, oppure evitare di toccarla con il polpastrello, sempre per non alterare la struttura preparata per accogliere solamente il gel ed evitare che si sollevi.

Queste sono le dritte per evitare di creare sollevamenti. Ho tralasciato il discorso del perchè è importante rimuoverli una volta creati, ma lo affronterò presto in un nuovo articolo.

Se vi è piaciuto, lasciate un like e condividete e alla prossima!

SOFIA