Archivi categoria: How To

Come realizzare fiori 3D

Bentornati Sul mio blog.

Oggi voglio spiegarvi come potete realizzare in modo facile e veloce dei fiori in 3D senza utilizzare l’acrilico.


Spesso si utilizza l’acrilico Perché col fatto che polimerizza all’aria è più facile gestire il prodotto, ma oggi vi farò vedere come poterlo fare con la plastilina e l’acrygel.


Iniziamo!

Plastilina

Per realizzare questa rosa con la plastilina ho scelto di utilizzare quella colorata di rosa. Esistono in commercio vari colori potete scegliere voi quali preferite. Oppure potete sceglierne uno neutrale e poi colorare la rosa.

Per realizzare la rosa utilizzo il retro di una cartina, potete usare anche la cartina stessa.

Inizio realizzando il pistillo.


Con un dotter prelevo una piccola quantità di prodotto e la appoggio sul pezzo di carta. Dopodiché con un pennello imbevuto di cleaner modello la plastilina in modo da formare un pistillo.

Lo polimerizzo.

Dopodiché prelevo un’altra quantità, un po’ più abbondante di prodotto e la appoggio sul pezzo di carta. Con il cleaner e il pennello la appiattisco in una forma abbastanza rotonda.

Faccio polimerizzare per circa 5 secondi e dopodiché tiro fuori il prodotto dalla lampada.
In questo momento è ancora molto morbido ma non troppo.
Con un pennello sollevo i lembi del cerchio in modo da cercare di unirli alla base formando una specie di triangolo è in questo modo si vedrà come si forma il petalo.

Una volta che ho finito di modellarla, la sollevo delicatamente, mi aiuto con una pinza per reggere il prodotto e la metto in lampada.

Ripeto lo stesso procedimento.
Una volta che però ho modellato i lembi del cerchio sollevo il prodotto e lo faccio polimerizzare insieme a petalo già creato. Li unisco alla base, aiutandomi con una pinzetta, e li lascio polimerizzare in quella posizione.

Quindi continuo così finché sono soddisfatta del fiore realizzato.

Per attaccare il fiore sull’unghia utilizzo del Poligel trasparente.
Ne applico una piccola quantità dove desidero che il fiore stia e in seguito ci appoggio la rosa. Lascio polimerizzare.

Quindi eseguo lo stesso procedimento con l’acrygel.

Acrygel

C’è poca differenza tra i due materiali, ho comunque deciso di realizzare una rosa diversa con l’acrygel.

Ecco il risultato.

Si presentano così a confronto.

Se volete vedere in pratica tutte le cose che ho spiegato adesso, potete andare a vedere il mio ultimo video su YouTube.
Nella sfida che realizzo, creò anche delle rose con l’acrygel.

L’articolo di oggi è finito. Spero che sia stato utile.


Se vi è piaciuto lasciate un like e condividete.


Non dimenticatevi di seguirmi su Instagram e sul mio canale YouTube.

Alla prossima!

SOFIA

How to create 3D flowers

Welcome back On my blog.

Today I want to explain how you can make 3D flowers quickly and easily without using acrylic.


Acrylic is often used because with the fact that it polymerizes in the air it is easier to manage the product, but today I will show you how to do it with plasticine and acrygel.


Let’s begin!

Plasticine

To make this rose with plasticine I chose to use the rose colored one. There are various colors on the market, you can choose which ones you prefer. Or you can choose a neutral one and then color the rose.

To create the rose I use the back of a nail form, you can also use the nailform itself.

I start by making the pistil.
With a dotter I take a small amount of product and place it on the piece of paper. Then with a brush soaked in cleaner model the plasticine so as to form a pistil.

Then I take another quantity, a little more abundant of product and place it on the piece of paper. With the cleaner and the brush I flatten it in a fairly round shape.

I let it cure for about 5 seconds and then I take the product out of the lamp.
At the moment it is still very soft but not too soft.
With a brush I lift the edges of the circle so as to try to join them to the base forming a kind of triangle and in this way you will see how the petal is formed.

Once I have finished modeling it, I gently lift it, use a pair of pliers to hold the product and put it on the lamp.

I repeat the same procedure.
Once I have modeled the edges of the circle, I lift the product and polymerize it together with the petal already created. I join them to the base, helping myself with tweezers, and let them cure in that position.

So I continue like this until I am satisfied with the flower made.

To attach the flower to the nail, use transparent Poligel.
I apply a small amount where I want the flower to stay and then I support the rose. I let it cure.

Acrygel

So I carry out the same procedure with the acrygel.

There is little difference between the two materials, however I decided to make a different rose with acrygel.

Here is the difference between acrygel and plasticine.

If you want to see practically all the things I have explained now, you can go and see my latest video on YouTube.
In the challenge I realize, he also created roses with acrygel.

Today’s article is finished. I hope it was useful.
If you liked it, leave a like and share.
Don’t forget to follow me on Instagram and on my YouTube channel.

See you next time!

SOFIA

Come realizzare la french 3D

Bentornati sul mio blog!
Oggi voglio spiegarvi come realizzare la french 3D.
Iniziamo!

Cos’è

La french 3D, è una decorazione che crea un effetto di ombre e profondità, realizzata come una french manicure.


Prodotti

Inizio subito dicendo quali prodotti consiglio di usare.
Siccome bisogna realizzare parecchi muretti, sconsiglio di usare il gel.
Io ho provato varie volte ad usarlo, ma i risultati sono pessimi.
Anche usando un gel poco autolivellante, il muretto non verrà mai ben definito.
Consiglio invece di usare l’acrilico, o il polygel, cone ho fatto io.
La realizzazione sarà molto più facile e veloce.

Ricostruzione

Io mi aiuterò con una mano finta.
Dopo aver opacizzato e preparato la mia unghia, eseguo l’allungamento, della forma e lunghezza che desidero.

Muretto rosa

Dobbiamo quindi lavorare con un french inverso profondo.
Realizzo quindi il mio primo muretto, con il polygel rosa.
Una volta polimerizzato, limo accuratamente la forma.

Colore

Dopo di che, applichiamo il colore sul muretto che si è formato e disegnamo la solita lunetta del french.


Muretto trasparente

Una volta che è stato polimerizzato il colore, lo ricopro con il polygel trasparente.
Mi assicuro di coprire il colore e creare abbastanza spessore, per poi poterlo limare.
Polimerizzo e limo di nuovo, per definirne la forma.


Ripeto i passaggi

Quindi bisogna ripetere gli stessi passaggi, fino a quando non siamo soddisfatti del nostro lavoro. È consigliato usare colori chiari, in modo da far notare maggiormente l’ombra che si viene a creare.


Struttura

Di sicuro una volta finito tutto ciò, la struttura risulterà più spessa di quanto dovrebbe essere.

Limiamo quindi la superficie dell’unghia.
Stiamo attenti però a non limare troppo, sennò rischiamo di eliminare il colore, rovinando la nail art.


Una volta finito tutto ciò, sigillo e il design è fatto!
Vi piace?
Non preoccupatevi se al primo tentativo non vi viene, io ci ho messo un po’ prima di capire come fare e quali prodotti usare, e ancora non mi viene perfettamente.
Di sicuro con la pratica miglioreró e di sicuro anche voi ci riuscirete.

Se questo articolo vi è piaciuto, lasciate un like e commentate!

Non dimenticate di seguirmi su Instagram e sul mio canale YouTube.

Alla prossima!

SOFIA

How to create 3D French

Welcome back to my blog!
Today I want to explain how to make French 3D.
Let’s begin!

What’s this

French 3D is a decoration that creates an effect of shadows and depth, made like a French manicure.

Products

I start immediately by saying which products I recommend to use.
Since you have to build several walls, I do not recommend using the gel.
I have tried several times to use it, but the results are bad.
Even using an harder gel, the wall will never be well defined.
I recommend instead of using acrylic, or polygel, as I did.
The realization will be much easier and faster.

Sculpting

I will help myself with a fake hand.
After having made opaque and prepared my nail, I create the nail, of the shape and length I want.

Pink wall

We must therefore work with a deep reverse French.
So I build my first wall, with pink polygel.
Once cured, I carefully define the shape.

Color

After that, I apply the color on the wall that has formed and I also draw the usual French smile line.

Clear wall

Once the color has been cured, I cover it with transparent polygel.
I make sure to cover the color and create enough thickness, to be able to file it.
I polymerize and define again the shape.

I repeat the steps

So we have to repeat the same steps, until we are satisfied with our work. It is recommended to use light colors, in order to make the shadow that is created more visible.

Structure

Certainly once all this is finished, the structure will be thicker than it should be.

So let’s file the nail surface.
We have to be careful in order not to file too much, otherwise we risk eliminating the color, ruining the nail art.

Once all this is done, seal and the design is done!

You like it?
Don’t worry if you don’t get it on the first try, it took me a while to figure out how to make and which products to use, and it still doesn’t come perfectly.
Certainly with practice I will improve and for sure you too will succeed.

If you liked this article, leave a like and comment!

Don’t forget to follow me on Instagram and on my YouTube channel.

See you next time!

SOFIA

Come realizzare il babyboomer

Bentornati sul mio blog!

Oggi voglio spiegarmi come io realizzo praticamente il baby boomer.

Iniziamo

Cos’è

Il baby boomer è un decoro che in questo ultimo anno è andato molto di moda.

È caratterizzato da una base rosa, che presenta sul margine libero una sfumatura eseguita con il bianco.

Si può realizzare sia in struttura che superficialmente.

Oggi vi spiego come farlo in modo facile in superficie.

Ricostruzione

Bisogna innanzitutto cominciare creando una ricostruzione, o comunque ad essere pronti per realizzare una copertura.

Io mi sono aiutata con la mia mano finta e ho eseguito una piccola ricostruzione dalla forma squadrata.

Cover rosa

Dopo di che, eseguo la mia struttura con un cover rosa, non troppo coprente.

Il mio presenta i brillantini, che danno un tocco il più al baby boomer.

Sfumatura

Dopo di che utilizzo un gel color bianco molto coprente e lo prelevo con il dito.

Inizio a picchiettarlo inizialmente dove voglio far finire la mia sfumatura, e lo sfumo bene, fin al margine libero.

Una volta che è ben sfumato, polimerizzo.

Siccome bisogna creare maggiore intensità sulla punta, ripeto il passaggio, iniziando a sfumare più in basso rispetto alla prima volta, invece tengo più intenso sulla punta.

Ripeto questi passaggi finché la sfumatura è bella e graduale.

Cover rosa

Una volta polimerizzato il bianco, applico uno strato abbastanza tirato, quasi come se fosse uno smalto, di cover rosa, per amalgamare ancora di più il tutto.

Una volta fatto polimerizzo.

Io preferisco dare la forma dopo aver fatto questi passaggi dunque limo il margine libero.

Quando sono soddisfatta passo il lucido e il gioco è fatto!

Questo articolo è finito, vi è stato utile? Io ho fatto molti tentativi prima di riuscire a capire come realizzarlo in modo facile e veloce.

Se questo articolo vi è piaciuto, lasciate un like e condividete.

Non dimenticatevi di seguirmi su Instagram e sul mio canale YouTube !

Alla prossima!

SOFIA

How to create easily baby boomer

Welcome back to my blog!

Today I want to explain how I practically make the baby boomer.

Let’s begin

What’s this

The baby boomer is a decoration that in this last year has been very popular.

It is characterized by a pink base, which has a shade of white on the free edge.

It can be realized both in structure and superficially.

Today I explain to you how to do it easily in surface.

Reconstruction

We must first start by creating a reconstruction, or at least be ready to make a cover the natural nail.


I helped myself with my fake hand and created a small, square-shaped reconstruction.

Pink cover

After that, I do my structure with a pink cover, not too opaque.


Mine presents glitter, which give baby boomer most light.

Shade

After this, I use a very opaque white gel and take it with my finger.


I start tapping him initially where I want to finish my nuance, and I blur it well, to the free margin.

Once it is well shaded, I polymerize.


Since we need to create more intensity on the tip, I repeat the passage, starting to fade lower than the first time, instead I keep it more intense on the tip.


I repeat these steps until the nuance is beautiful and gradual.


Pink cover

Once the white is cured, I apply a fairly tight layer of pink cover, almost as if it is polish, to amalgamate the whole thing even more.

Then I cure.

I prefer to give the shape after making these steps.

When I am satisfied I pass the polish and you’re done!
This article is finished, was it useful? I made many attempts before I could figure out how to do it quickly and easily.

If you liked this article, leave a like and share.

Don’t forget to follow me on Instagram and on my YouTube channel!

Until next time!

SOFIA

Come disegnare una rosa

Buongiorno a tutti!

Oggi nuovo articolo del blog!

Vi spiego come disegnare in modo facile e veloce una rosa.

Iniziamo!

Schema della rosa

Prima di vedere come si realizza praticamente, vi mostro lo schema per realizzare il disegno.

Principalmente si realizzano 5 petali.

Il primo forma come una c, e si può scegliere dove direzionarlo.

Gli altri petali girano tutti intorno a lui.

Se ne disegna un secondo e un terzo che avvolgono completamente il primo.

Il quarto e il quinto invece sono più corti, in modo da non far sembrare la rosa un vortice.

Rosa in gel

Abbiamo due metodi per poter realizzare i decori sulle unghie.

Con la pittura acrilica e con i gel color.

Io consiglio di utilizzare gel colorati senza dispersione perché sono molto pigmentati e rimangono li dove li mettete.

Base

mde

Scegliete il vostro colore di base, io in questo caso ho realizzato una sfumatura tra bianco e nero.

Step 1

smacap_Bright

Realizzo quindi il primo petalo che è una c.

Una cosa molto importante è fare l’inizio della linea molto sottile, inspessirla e renderla irregolare verso il centro, e si nuovo sottile alla fine.

Si crea così il senso di movimento e petalo imperfetto.

Step 2

mde

Realizzo il secondo petalo che avvolge il primo completamente

Step 3

mde

Il terzo petalo avvolge completamente il secondo. Un’altra cosa importante è non realizzare troppo vicini i petali, e neanche troppo lontani.

Step 4

mde

Il quarto petalo posso scegliere se posizionarlo più sulla sinistra o silla destra, l’importante è che sia la metà dei petali realizzati fino ad ora.

Step 5

mde

Il quinto petalo segue lo stesso procedimento del quarto, però viene realizzato sul lato opposto del quarto, in modo da completare il cerchio.

Fine decorazione

Ho realizzato quindi un’altra rosa grande.

E poi ai lati altre piccole roselline in modo da bilanciare la decorazione.

Rose con pittura acrilica

Il procedimento del disegno è lo stesso, però bisogna realizzare un’accortezza.

Dopo aver steso il colore di base, si passa uno strato di top coat e dopo averlo catalizzato, si opacizza in modo da far aggrappare meglio la pittura acrilica.

smacap_Bright

Posiziono quindi un po’ di pittura su una superficie e la diluisco in base a quanta densità del prodotto desidero.

Quindi eseguo con gli stessi passaggi le rose e il resto della decorazione.

Ecco qua la spiegazione di come realizzare facilmente delle rose.

Vi piacciono i risultati finali?

Spero che questo articolo vi sia stato utile.

Se vi è piaciuto lasciate un like e condividete.

Non dimenticatevi di seguirmi su Instagram e sul mio canale YouTube.

Alla prossima!

SOFIA

How to draw a rose

Goodmorning everyone!

Today new blog article!

I’ll explain how to quickly and easily draw a rose.

Let’s begin!

Rose pattern

Before seeing how it is practically made, I show you the scheme to make the design.

Mainly 5 petals are made.

The center forms like a c, and you can choose where to direct it.

The other petals all revolve around him.

A second and a third are drawn completely surrounding the first.

The fourth and fifth instead are shorter, so as not to make the rose seem like a vortex.

Gel color rose

We have two methods to be able to make the decorations on the nails.

With acrylic paint and gel colors.

I recommend using gels without inibition layer because they are very pigmented and remain where you put them.

Base

Choose your base color, in this case I have created a shade between black and white.

Step 1

So I make the first petal which is a c.

A very important thing is to make the beginning of the line very fine, thicken it and make it irregular towards the center, and then thin again at the end.

This creates the sense of movement and imperfect petals.

Step 2

I make the second petal that wraps the first completely

Step 3

The third petal completely wraps around the second. Another important thing is not to make the petals too close, nor too far away.

Step 4

The fourth petal I can choose whether to place it more on the left or on the right, the important thing is that it is half length of the petals made so far.

Step 5

The fifth petal follows the same procedure as the fourth, but is made on the opposite side of the fourth, in order to complete the circle.

End of decoration

So I made another big rose.

And then on the sides other small roses in order to balance the decoration.

Roses with acrylic paint

The process of the drawing is the same, but you have to make a note.

After applying the base color, we apply a layer of top coat and after curing it, you have to matify it so the acrylic paint clings better.

I then place a little paint on a surface and dilute it based on how much density of the product I want.

So I go through the same steps with the roses and the rest of the decoration.

Here is the explanation of how to easily make roses.

Do you like the final results?

I hope this article has been helpful.

If you liked it, leave a like and share it.

Don’t forget to follow me on Instagram and on my YouTube channel.

See you next time!

SOFIA

Come mantenere bella una ricostruzione

Ciao a tutti!

Oggi nuovo articolo. Voglio darvi consigli e spiegarvi come mantenere durante le ipotetiche 3 settimane, o di più, le unghie ricostruite belle.

Iniziamo!

Usare le unghie con delicatezza

Probabilmente per chi non ha mai avuto la unghie lunghe e all’improvviso se le ritrova di 2 centimetri, all’inizio sarà difficile imparare a gestirle e conviverci.

Inizialmente si potrebbero prendere parecchie botte, ma quello non è un problema perché se una ricostruzione è eseguita bene, seguendo i corretti canoni, ci saranno maggiori probabilità che non si rompa.

Il problema è quando si usano le unghie ricostruite come se non ce le avessimo.

Non fraintendetemi, potete fare tutto però bisogna avere qualche accortezza in più

L’importante è usare le unghie con delicatezza e non come attrezzi.

Evitate di usarle come leve, e se avete dubbi su come vivere con le unghie lunghe, leggete questo articolo dove vi do qualche consiglio su come gestirle.

Prodotti chimici

Noi donne, giovani o più mature, prima o dopo avremo a che fare con i prodotti chimici, che possono essere quelli per pulire casa, per il bucato o non so, prodotti chimici usati per particolari lavori.

Se si sa che se ne fa spesso uso, per preservare la lucidità e l’integrità sarebbe meglio indossare dei guanti.

I prodotti aggressivi potrebbero compromettere la ricostruzione, causando opacità del top coat o magari sollevamenti.

Mani in bocca

Questo vale sia per per le persone onicofagiche che di abitudine hanno le mani in bocca, ma anche per le persone che non hanno questa abitudine.

Magari si è nervosi o sovrappensiero e si portano le unghie alla bocca.

Sempre al fine di mantenere una ricostruzione perfetta durante il tempo, sconsoglio di giocherellare e mordicchiare le vostre unghie.

Comunque i prodotti come gel e acrilico sono duri e potreste causarvi danni ai denti o comunque ingerire piccole parti di prodotto e non è salutare.

Non strappare le unghie

Un’altra cosa fondamentale per mantenere le unghie sane è quello di non strappare le unghie.

La tentazione potrebbe insorgere se come dicevo prima, abbiamo le mani in bocca, ma anche se ci sono dei piccoli sollevamenti.

Non strappate mai i sollevamenti o le unghie sollevate, sia per non eliminare importanti strati delle vostre unghie, ma anche per facilitare poi il lavoro dell’operatrice.

Se strappate una o più unghie, poi le toccherà ricostruirla, impiegando più tempo del previsto.

Rispettare i Refill

Per ultima metto penso la cosa più importante.

Per evitare sollevamenti e rotture di unghie, è importantissimo rispettare i tempi del refill.

Ogni circa 3-4 settimane è importante tornare dell’operatrice per ribilanciare la bombatura e quindi assicurarsi la salute delle proprie unghie.

Ovviamente potrebbero esserci persone tipo le onicofagiche che ogni 15 giorni devono presentarsi nel salone, perché è sempre meglio tenerle sotto controllo.

Se non si rispettano questi tempi, si rischia di presentare principalmente sollevamenti che potrebbero causare infiltrazioni di acqua, e comunque creare il territorio ideale per la crescita di batteri.

Inoltre più l’unghia cresce, più la bombura avanza e non protegge bene il punto do stress, questo si può tradurre in rotture di unghie, sia solo il prodotto ma anche la lamina, e vi assicuro che è molto doloroso.

L’articolo di oggi giunge al termine. Spero che con questi consigli riuscirete a tenere meglio le vostre ricostruzioni sia per preservare la salute delle vostre unghie ma anche per facilitare e fare felice la vostra onicotecnica.

Se questo articolo vi è piaciuto lasciate un like e condividete.

Non dimenticatevi di seguirmi su Instagram e sul mio canale YouTube

Alla prossima.

SOFIA

How to maintain a full set during time

Hello everyone!

Today new article. I want to give you advice and explain how to maintain beautiful reconstructed nails during the hypothetical 3 weeks, or more.

Let’s begin!

Use your nails gently

Probably for those who have never had long nails and suddenly if they find them 2 centimeters, at first it will be difficult to learn how to manage them and live with them.

Initially it could take a lot of hits, but that is not a problem because if a reconstruction is done well, following the correct canons, there will be a greater chance that it will not break.

The problem is when we use reconstructed nails as if we don’t have them.

Don’t get me wrong, you can do everything, however you need to have some more precautions

The important thing is to use the nails gently and not as tools.

Avoid using them as levers, and if you have doubts about how to live with long nails, read this article where I give you some advice on how to manage them.

Chemical products

We women, young or more mature, sooner or later we will have to deal with chemicals, which can be those for cleaning the house, for laundry or I don’t know, chemicals used for particular jobs.

If you known that you will use them often, it is better to wear gloves to maintain clarity and integrity.

Aggressive products could compromise the reconstruction, causing top coat opacity or maybe lifting.

Hands in your mouth

This applies both to onychophagic that are people who have their hands in their mouths constantly, but also to people who do not have this habit.

Maybe you are nervous or thoughtless and bring your nails to your mouth.

Always in order to maintain a perfect reconstruction over time, I recommend you not to fiddle and nibble your nails.

However products like gel and acrylic are hard and you could cause damage to your teeth or otherwise ingest small parts of the product and it is not healthy.

Don’t tear your nails

Another key thing to keep your nails healthy is not to tear your nails.

The temptation could arise if, as I said before, we have our hands in the mouth, but even if there are small lifts.

Never tear off the lifts or raised nails, in order not to eliminate important layers of your nails, but also to facilitate the work of the operator.

If you tear off one or more nails, then you will have to rebuild them, taking the process longer than expected.

Respect the Refills

Last of all, I think the most important thing.

To avoid lifting and breaking nails, it is very important to respect the refill times.

Every 3-4 weeks it is important to return to the operator to rebalance the apex and thus ensure the health of your nails.

Obviously there could be people like the onychophagics who must show up in the salon every 15 days, because it is always better to keep them under control.

If these times are not respected, there is a risk of presenting mainly lifts that could cause water infiltration, and in any case create the ideal territory for the growth of bacteria.

Furthermore, the more the nail grows, the more the apex advances and does not protect the stress point well, this can translate into broken nails, both only the product but also the surface, and I assure you that it is very painful.

Today’s article comes to an end. I hope that with these tips you will be able to better maintain your reconstructions both to preserve the health of your nails but also to facilitate and make your nail technician happy.

If you liked this article, leave a like and share.

Don’t forget to follow me on Instagram and on my YouTube channel

Until next time.

SOFIA